Stehle

For ripping and cross cuts in wood-based panels

•portable saws •for sizing cuts in cement-bound boards •tooth configuration: flat “F” •cutting material: DP •coated saw blade body •low power consumption thanks to reduced kerf •cannot be used for stone, glass and nails •suitable for cordless and corded portable machines •Attention: consider thickness of the splitting wedge!

•portable saws •for sizing cuts in cement-bound boards •tooth configuration: flat “F” •cutting material: DP •coated saw blade body •low power consumption thanks to reduced kerf •cannot be used for stone, glass and nails •suitable for cordless and corded portable machines •Attention: consider thickness of the splitting wedge!

•portable saws •for sizing cuts in cement-bound boards •tooth configuration: flat “F” •cutting material: DP •coated saw blade body •low power consumption thanks to reduced kerf •cannot be used for stone, glass and nails •suitable for cordless and corded portable machines •Attention: consider thickness of the splitting wedge!

• Portable saws• For sizing cuts in cement-bound boards• Not for stone, glass and nails• Tooth configuration: Flat with chamfer "F-FA"• Cutting material DP • Coated saw blade body• Excellent chip removal thanks to large chip evacuation gap• Easy cutting thanks to large hook angle• Suitable for : Plasterboard, Eternit, Promatec, IBS, Fermacell®, etc.

For ripping and cross cuts in wood-based panels

For ripping and cross cuts in wood-based panels

Low number of teeth for solid wood
High number of teeth for cutting and wood-containing panel materials

•table saws
•special machines
•for sizing cuts in solid woods
•tooth configuration: alternate top
•cutting material: HW TC10/HW  TC06

• Portable saws• For sizing cuts in cement-bound boards• Not for stone, glass and nails• Tooth configuration: Flat with chamfer "F-FA"• Cutting material DP • Coated saw blade body• Excellent chip removal thanks to large chip evacuation gap• Easy cutting thanks to large hook angle• Suitable for : Plasterboard, Eternit, Promatec, IBS, Fermacell®, etc.

• Portable saws• For sizing cuts in cement-bound boards• Not for stone, glass and nails• Tooth configuration: Flat with chamfer "F-FA"• Cutting material DP • Coated saw blade body• Excellent chip removal thanks to large chip evacuation gap• Easy cutting thanks to large hook angle• Suitable for : Plasterboard, Eternit, Promatec, IBS, Fermacell®, etc.

•table saws
•special machines
•for sizing cuts in solid woods
•tooth configuration: alternate top
•cutting material: HW TC10/HW  TC06

• Portable saws• table saws and pnel sizing saws• For sizing cuts in plastic-laminated panels, trespa, MDF, Alucobond• Tooth configuration: triple chip/flat TR-F• Cutting material: HW TC06

• For cross cuts in solid woods and wood-based panels
• High cutting quality and safe handling thanks to negative hook angle

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

• For sizing cuts in solid woods• Especially for knotty woods• No chipped edges from knots thanks to chip limiter

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

• For cross cuts in solid woods and wood-based panels
• High cutting quality and safe handling thanks to negative hook angle
• Low number of teeth for solid wood• High number of teeth for cutting and wood-containing panel materials

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

Planer knive 1030 x 35 x 3 mm HSS
2 pieces

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 1.0 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails

•portable saws •for trimming and finish cuts in laminate, MDF, particle boards, cement-bound boards, Corian®, thermosetting plastics, gypsum boards and melamine •tooth configuration: flat with chamfer “F-FA” •cutting material: DP •resharpening area 2.5 mm •coated saw blade body •excellent chip removal thanks to large chip evacuation gap •easy cutting thanks to large hook angle •lower numbers of teeth for trimming cuts •higher numbers of teeth for sizing cuts •not for stone, glass and nails