Mandrex

Pilot drill with Tungsten carbide percussion drill tip (TCT) - L=125mm 7mm

Pilot drill HSS L=105mm Ø6,35mm
E.g. for wood, plastics, (stainless)steel
Suitable for short hole saws up to 35 mm long

Pilot drill HSS M2 with 135 degrees split point for smooth drilling - L=125mm Ø6,35mm
E.g. for wood, plastics, (stainless)steel

Center drill MX2P0068B HSS-CO with 8% cobalt 135 degrees split point 125mm Ø 6.35mm
For example for stainless steel, iron, cast iron, steel and materials with a tensile strength up to 1000 NM/mm2

MXqs ONE CLICK adapter for all types of Bi-metal and Multipurpose Hole Saws 14 - 30 mm
1/2”–20UNF thread for Hole Saw diameters Ø14-30mm
3 pieces

Set with 3 adapters to enlarge the previously drilled hole.
1 adapter for using Hole Saws with 1/2” thread
1 adapter for using Hole Saws 1/2” and 5/8” thread
1 adapter for using Hole Saws with 5/8”thread

MXqs ONE CLICK adapter for all types of Bi-metal and Multipurpose Hole Saws 
5/8”–18UNF thread for Hole Saw diameters Ø32-150mm
3 pieces

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.

FOR ALMOST ANY MATERIAL
The thin walls of the discs ensure quick clean cuts through almost any material including (stainless) steel, cast iron, rebar, masonry and many more.
The Diamond Edge Cut-off discs from Mandrex feature a diamond abrasive edge, combined with a shatter-resistant steel core. This combined, ensures safe operation, reduced dust and debris and an extreme long lifetime.
The Mandrex MetalXcut diamond cut-off discs are designed to retain its cutting power up to 50 times longer than typical bonded abrasive products.

Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges. Executed with unique ejection holes for extra chip release and weight reduction. Our special tooth geometry provides the smoothest cut, requiring less feed pressure.
Suitable for:
Acrylic, Aluminium, Brass, Carbon steel, Chipboard, Epoxy, Iron, Laminate, Laminated board, MDF, Metal pipe / profile, Mild Steel, Non ferrous, Oriented Strand Board (OSB), Plastic, Plastics (o.a. PVC), Plywood, PVC, Reinforced plastic, Soft wood, Wood, Wood & Plywood, Wood with Nails

The fastest Hole Saw with unique carbide tooth set for clean and high performance cutting.Easily 10 times the lifetime compared to Bi-metal Hole Saws. Carbide tipped teeth are made of a specially developed construction grade carbide, resulting in outstanding cutting performance and product durability.

Mandrex Diamond drill 6mm.
This drill can be used on the angle grinder with M14 connection

Mandrex Diamond drill 8mm.
This drill can be used on the angle grinder with M14 connection

The fastest Hole Saw with unique carbide tooth set for clean and high performance cutting.

Mandrex MXqs Arbor Drill Chuck Hex 8,5 - 11/32”PB for DryXcut
Max drill diameter 30 mm

Mandrex MXqs Arbor Drill Chuck Hex 11 - 7/16”PB for DryXcut

Mandrex Diamond drill 6mm with one-click adapter.
This drill can be used on the angle grinder with M14 connection
Or on the drill by means of a one-click mounting.

Mandrex Diamond drill 8mm with one-click adapter.
This drill can be used on the angle grinder with M14 connection
Or on the drill by means of a one-click mounting.

MXqs Arbor For TCT Hole Saws. With Carbide tipped pilot drill
Drill Chuck Hex 11 - 7/16”PB.
E.g. for concrete, sandstone, brickwork, soft tiles
With pilot drill MX2P0062B L=125mm

MXqs Arbor For TCT & Bi-metal Hole Saws With HSS Pilot drill
Drill Chuck Hex 11 - 7/16”PB.
E.g. for wood, plastics, steel, stainless
With pilot drill MX2P0063B L=125mm

MXqs Arbor Complete with HSS Pilot drill L105mm 6.35mm MX200026B

MXqs Arbor Complete for SHORT Bi-metal Hole Saws. (35mm)
With short HSS Pilot drill L105mm 6.35mm
Drill Chuck Hex 8.5 - 11/32âPB.
E.g. for wood. plastics. steel. stainless

Mandrex MXqs ConcreteXdry Hole saw holder MX200028B hex. 8.5  11/32" + TCT Centering drill

MXqs Arbor Drill Chuck SDS-PLUS for DryXcut

Mandrex MXqs ConcreteXdry Hole saw holder MX200029B SDS + TCT Centering drill

MXqs All Purpose UltraXcut

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills

Mandrex Tiles XtremePro Diamond Saw Blade MDZT125X 125mm
Super thin diamond saw blade with reinforced core: specially designed to cut the hardest ceramic tiles.
Guarantees a long life and extremely good results.

MXqs All Purpose UltraXcut

Widest range of materials
Up to 2 times faster & 50 times the lifetime (compared to Bi-Metal)
Optimized heat resistant carbide teeth, lesser cooling needed
Cutting depth 60mm (2-3/8”) for deeper holes in one pass
Large clearance of chips: specially designed slots
Easy release of the core
Hardened steel wall
Very clean cuts, also at the entry and exit
Suitable for use in electric, battery powered tools & bench drills