Filter By
Availability
Shank
Radius / Angle
Chamfering bits
Chamfering bits
Bevel cutter with plunging facility 45° S6mm
Bevel cutter for folding and chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Chamfer cutter with ball bearing 45 deg. 28.6 mm
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
- -15%
- -15%
Chamfer cutter with ball bearing 45 deg. 28.6 mm
ENT 13801 Chamfer cutter 45 degrees with ball bearing and 6 mm shank
- -15%
- -15%
Miniature bevel cutter with bearing 45° D14 S8mm
Miniature bevel cutter with bearing 45 degrees
- -10%
- -10%
Bevel cutter with guide pin 30° S8mm
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Bevel cutter with guide pin 45° S6mm
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Miniature bevel cutter with bearing 45° D22 S8mm
Miniature bevel cutter with bearing 45 degrees
- -10%
- -10%
Miniature bevel cutter with bearing 45° D22 S6mm
Miniature bevel cutter with bearing 45 degrees
- -10%
- -10%
Bevel cutter with guide pin 45° S8mm
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
- -10%
- -10%
Bevel cutter with center tip 10° S8mm
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Bevel cutter with center tip 15° S8mm
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Bevel cutter with center tip 20° S8mm
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Bevel cutter with center tip 30° S8mm
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Double chamfering bit 45° S6mm
Double chamfering bit HW Z=2+2 A=45 degrees L=15 S=6
- -10%
- -10%
Bevel cutter with center tip 45° S8mm
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
- -10%
- -10%
Trimming bevel 45° S8mm cutter with bearing
Trimming bevel cutter with bearing
- -10%
- -10%
Bevel cutter 10° S12mm with high cutting length
Bevel cutter with high cutting length
- -10%
- -10%
Chamfering bits