JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filter By
Availability
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
There are 98 products.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Morbidelli, Biesse, Weeke, Reimall, Torwegge, Busellato, Bottcher, Gessner, Ayen S = M10x1,5 mmD = 19 mmL = 31 mmGL = 47 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
For drill bits with 10 mm shank and clamping surface. Suitable...
For drill bits with 10 mm shank and clamping surface. Suitable for machines from: Albert, SCM, Schleicher, Vitap, Balestrini, Ombe, Bilek S = M10x1,5 mmD = 19 mmA = 15°L = 20 mmGL = 46 mm
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
For use on twist drills with a 10 mm shank and a diameter of 4...
For use on twist drills with a 10 mm shank and a diameter of 4 mm to 10 mm.The countersinkis guided to the shank via the drill spiral and fastened there.
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Suitable for: aluminum, copper, plastics
Suitable for: aluminum, copper, plastics
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Water channel cutter with bearing
Water channel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Straight bit shank 8mm
Straight bit shank 8mm
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.