Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Active filters
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
LOW-NOISE 45 degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 45 degrees pre-milling cutter 80x48x30+2KN CCEN350128
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN CCEN350127
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for...
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines
