Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Home
Groover 1.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 2.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 3.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 5.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 4.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
V-Groove cutter 135° S8mm...
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
- -10%
- -10%
Bevel cutter 45° S8mm
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
- -10%
- -10%
Groover D80 L4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
- -10%
- -10%
Groover D80 L5 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
- -10%
- -10%
Groover D80 L6 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
- -10%
- -10%
Groover D80 L8 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
- -10%
- -10%
Weather strip D36 S12mm...
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
- -10%
- -10%
Weather strip D36 S8mm...
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
- -10%
- -10%
Replacement tip rebate...
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
- -10%
- -10%
Overlapped trimmer with...
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
- -20%
- -20%
Groover D80 L10 with bore...
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
- -10%
- -10%
Bevel cutter 45° S12mm
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%
Reverse profil bevel cutter...
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%
Weather strip cutter D36...
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
- -10%
- -10%
Helical planning and...
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
- -15%
- -15%
Helical planning and...
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
- -15%
- -15%
Helical planning and...
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
- -15%
- -15%
Helical planning and...
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
- -15%
- -15%
Helical planning and...
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
- -15%
- -15%
Face milling bit D80 L12 S16mm
Face milling bit D=80 L=12 S=16mm
Face milling bit D=80 L=12 S=16mm
- -10%
- -10%