Filter By
Availability
Bore
Thickness
Shank
Diameter (D)
Cutting length/height:
Total Length
Radius / Angle
Cutters
Bi-metal M3 Hole Saws with vario-pitched teeth for...
Bi-metal M3 Hole Saws with vario-pitched teeth for applications where fast cutting and low price are the main challenges.
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Straight bit shank 8mm
Straight bit shank 8mm
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Straight bit shank 8mm
Straight bit shank 8mm
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Straight bit shank 12 mm
Straight bit shank 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Overlapped trimmer with interchangeable knives 80 x 25 x...
Overlapped trimmer with interchangeable knives 80 x 25 x 16+2KN N3401N0428 RS10 Rough trimming unit
Groover D=80 L=4 with bore 12 mm
Groover D=80 L=4 with bore 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Helical head for medium finishing with body in light alloy...
Helical head for medium finishing with body in light alloy equipped with 12 pieces 14x14x2 knives (600201) in HW with four cutting edges.
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip straight cutter internal thread M12x1
Replacement tip Straight bit Z=2 Shank 12 mm
Replacement tip Straight bit Z=2 Shank 12 mm
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
Helical head for medium finishing with body in light alloy
