Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::11-22mm clear
  • Cutting length/height::14mm clear
  • Cutting length/height::60mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(18) L2(35) clear
Double rounding over / chamfer bit adjustable R2.5 45° S8mm | Titman Tools
  • -15%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
in stock
€129.74 -15% €110.28 
Sinking cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€69.96 -15% €59.47 
Spiral cutter Negative for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Positiv for Plastics D4 L14 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Straight cutter D18 L60 M10x1.5 | Titman Tools
  • -15%

Straight groove bits

Straight cutter D18 L60 M10x1.5

Ref: TM1860-M10
Straight cutter internal thread M10x1.5
in stock
€98.00 -15% €83.30 
Trimmers with bearing D18 S8mm | Titman Tools
  • -15%

Flush trim bit

Trimmers with bearing D18 S8mm

Ref: BGT90-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
in stock
€59.00 -15% €50.15 
V-Groove cutter 45° L1(14) S8mm | Titman Tools
  • -15%

V-Groove Bits

V-Groove cutter 45° L1(14) S8mm

Ref: VGC45L-8
These cutters create a straight line of approx. 1 mm at the bottom.
D=28 A=45° L1=14 L2=18 B=19 S=8mm
in stock
€75.00 -15% €63.75