Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::19mm clear
  • Cutting length/height::50mm clear
  • Cutting length/height::L1(18) L2(35) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
Rebate cutter steel body 125 x 50mm bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 40mm

Ref: TH02TM04040
Bore 40mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
in stock
€180.70 -21% €142.76 
Rebate cutter steel body 180 x 50 mm bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 180 x 50 mm bore 40mm

Ref: TH02TM06040
Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood, chipboard, veneered and laminated panels, plywood, etc.The shear angle allows a better chip removal and a longer cutting edge life.
in stock
€275.00 -21% €217.25 
Replacement tip trimmer D19 L50 S12mm
  • -15%

Flush trim bit

Replacement tip trimmer D19 L50 S12mm

Ref: BGT90XL-12RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€128.00 -15% €108.80 
Rounding over bit R12,7mm S12mm
  • -15%

Rounding over bits

Rounding over bit R12,7mm S12mm

Ref: ROCB127-12
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€79.00 -15% €67.15 
Single flute cutter 10mm S12 for solid surface
  • -15%

For corian / HIMACS

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€43.00 -15% €36.55 
Single flute cutter D8 S12 for solid surface
  • -15%

For corian / HIMACS

Single flute cutter D8 S12 for solid surface

Ref: XC001-8-12
Groove cutter Z1 with diameter 8mm and shank 12mm.
Suitable for Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari
in stock
€38.20 -15% €32.47 
Spiral cutter Negative for Plastics D5 L19 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D6 L19 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€22.00 -15% €18.70 
Spiral cutter Positiv for Plastics D5 L19 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Straight Cutter TC Z1 D6 S8mm
  • -20%

Straight groove bits

Straight Cutter TC Z1 D6 S8mm

Ref: ENT-10050
ENT Straight Cutter TC / One Flute with 8 mm shank
in stock
€16.00 -20% €12.80 
Straight Cutter TC Z2 D12 L50 S12mm
  • -20%

Straight groove bits

Straight Cutter TC Z2 D12 L50 S12mm

Ref: ENT-10378
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
in stock
€29.50 -20% €23.60 
Tongue & Groove Set TC ENT 17390
  • -20%

Tongue and groove cutters

Tongue & Groove Set TC ENT 17390

Ref: ENT-17390
ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank
in stock
€93.00 -20% €74.40 
Tongue and groove cutter for solid surface
  • -15%

For corian / HIMACS

Tongue and groove cutter for solid surface

Ref: XC511-12
In combination with the XC506-12 cutter you can make a tongue and groove connection.
Suitable for e.g.

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€142.48 -15% €121.11 
Tongue and groove cutter for solid surface
  • -15%

For corian / HIMACS

Tongue and groove cutter for solid surface

Ref: XC506-12
In combination with the XC511-12 cutter you can make a tongue and groove connection.
Suitable for e.g.

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€142.48 -15% €121.11 
Trimmers with bearing D18 L50 S12mm
  • -15%

Flush trim bit

Trimmers with bearing D18 L50 S12mm

Ref: BGT90LK2-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
in stock
€104.00 -15% €88.40 
Trimming Cutter 19 x 50 mm ENT 13465
  • -20%

Flush trim bit

Trimming Cutter 19 x 50 mm ENT 13465

Ref: ENT-13465
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
in stock
€74.00 -20% €59.20