Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::19mm clear
  • Cutting length/height::30mm clear
  • Cutting length/height::L1(6,2mm) L2(11mm) clear
  • Cutting length/height::L1(6,2mm) L2(11mm) clear
  • Cutting length/height::L1(18) L2(35) clear
  • Cutting length/height::L1(35mm) clear
quarter round cutterhead R15 Bore 30mm | Stark
  • -21%

Quater round cutterheads

quarter round cutterhead R15 Bore 30mm

Ref: TH70TM02030
Steel body with standard tungsten carbide profiled knives for quarter rounds, axial angle for excellentmilling results and reduced cutting pressure, different radius can be fitted onto the same tool body, TH70TM02 is supplied with R 15 mm knives
Optional R12, R18 and R20 knives
in stock
€167.00 -21% €131.93 
Replacement tip trimmer D19 L30 S12mm | Titman Tools
  • -15%

Flush trim bit

Replacement tip trimmer D19 L30 S12mm

Ref: BGT90LK-12RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€116.00 -15% €98.60 
Replacement tip trimmer D19 L30 S8mm | Titman Tools
  • -15%

Flush trim bit

Replacement tip trimmer D19 L30 S8mm

Ref: BGT90LK-8RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€116.00 -15% €98.60 
Rounding over bit R12,7mm S12mm | Titman Tools
  • -15%

Rounding over bits

Rounding over bit R12,7mm S12mm

Ref: ROCB127-12
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€79.00 -15% €67.15 
Single flute cutter 10mm S12 for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€43.00 -15% €36.55 
Single flute cutter D8 S12 for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Single flute cutter D8 S12 for solid surface

Ref: XC001-8-12
Groove cutter Z1 with diameter 8mm and shank 12mm.
Suitable for Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari
in stock
€38.20 -15% €32.47 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€22.00 -15% €18.70 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Straight bit Z2 D19 L30 S12mm | Titman Tools
  • -15%

Pattern bit / Top bearing straight bits

Straight bit Z2 D19 L30 S12mm

Ref: PGC19LK-12RT
Straight bit Z=2 D=19 L=30 S=12
in stock
€105.00 -15% €89.25 
Straight bit Z2 D19 L30 S8mm | Titman Tools
  • -15%

Pattern bit / Top bearing straight bits

Straight bit Z2 D19 L30 S8mm

Ref: PGC19LK-8RT
Straight bit Z=2 D=19 L=30 S=8 mm
in stock
€115.53 -15% €98.21 
Straight bit 16mm L30 S8mm | Titman Tools
  • -15%

Straight groove bits

Straight bit 16mm L30 S8mm

Ref: M1630/90-8
Straight bit shank 8mm
in stock
€68.39 -15% €58.14 
Straight Cutter TC Z1 D6 S8mm | ENT
  • -20%

Straight groove bits

Straight Cutter TC Z1 D6 S8mm

Ref: ENT-10050
ENT Straight Cutter TC / One Flute with 8 mm shank
in stock
€16.00 -20% €12.80 
Straight Cutter TC Z2 D18 L30 S8mm | ENT
  • -20%

Straight groove bits

Straight Cutter TC Z2 D18 L30 S8mm

Ref: ENT-10404
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
in stock
€26.00 -20% €20.80 
Straight Cutter with Centre Tip 14 x 30 x 63 mm ENT 10980 | ENT
  • -20%

Straight groove bits

Straight Cutter with Centre Tip 14 x 30 x 63 mm ENT 10980

Ref: ENT-10980
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
in stock
€38.00 -20% €30.40 
Tongue & Groove Set TC ENT 17390 | ENT
  • -20%

Tongue and groove cutters

Tongue & Groove Set TC ENT 17390

Ref: ENT-17390
ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank
in stock
€93.00 -20% €74.40