Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::14mm clear
  • Cutting length/height::L1(9,5mm) L2(18mm) clear
  • Cutting length/height::L1(9,5mm) L2(18mm) clear
  • Cutting length/height::L1(14mm) L2(18mm) clear
  • Cutting length/height::L1(35mm) clear
Spiral cutter Negative for Plastics D4 L14 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D4 L14 S6mm

Ref: AC4DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Positiv for Plastics D4 L14 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D4 L14 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Trimmers with bearing D18 S8mm
  • -15%

Flush trim bit

Trimmers with bearing D18 S8mm

Ref: BGT90-8
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
in stock
€59.00 -15% €50.15 
V-Groove cutter 45° L1(14) S12mm
  • -15%

V-Groove Bits

V-Groove cutter 45° L1(14) S12mm

Ref: VGC45L-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=38 A=45° L1=19 L2=25 B=25 S=12mm 
in stock
€91.00 -15% €77.35