Prices drop

Active filters

  • Cutting length/height::11-22mm clear
  • Cutting length/height::38mm clear
  • Cutting length/height::52mm clear
  • Cutting length/height::L1(14mm) L2(18mm) clear
  • Cutting length/height::L1(15mm) L2(23mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Double rounding over / chamfer bit adjustable R2.5 45° S8mm
  • -15%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
in stock
€129.74 -15% €110.28 
Eco-Line Mini D20 L52 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D20 L52 S20mm PCD router cutter

Ref: P03990
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€165.00 -20% €132.00 
Trimmer D12.7 L38 S12mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmer D12.7 L38 S8mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S8mm with double bearing

Ref: BGT903LK-8
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
V-Groove cutter 45° L1(14) S12mm
  • -15%

V-Groove Bits

V-Groove cutter 45° L1(14) S12mm

Ref: VGC45L-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=38 A=45° L1=19 L2=25 B=25 S=12mm 
in stock
€91.00 -15% €77.35