Prices drop

Active filters

  • Cutting length/height::11-22mm clear
  • Cutting length/height::37mm clear
  • Cutting length/height::38mm clear
  • Cutting length/height::L1(8mm) L2(26mm) clear
  • Cutting length/height::L1(14mm) L2(18mm) clear
  • Cutting length/height::L1(15mm) L2(23mm) clear
Double rounding over / chamfer bit adjustable R2.5 45° S8mm
  • -15%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
in stock
€129.74 -15% €110.28 
T-Slot cutter D28 L8 S12 mm
  • -15%

T-Slot cutter

T-Slot cutter D28 L8 S12 mm

Ref: TSS28-12
T-Slot cutter
Out of stock, please inquire about delivery time
€94.00 -15% €79.90 
Trimmer D12.7 L38 S12mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmer D12.7 L38 S8mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S8mm with double bearing

Ref: BGT903LK-8
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmers with bearing D12,7 L37 S12mm
  • -15%

Flush trim bit

Trimmers with bearing D12,7 L37 S12mm

Ref: IBGT90LK1-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€95.00 -15% €80.75 
Trimmers with bearing D18 L37 S12mm
  • -15%

Flush trim bit

Trimmers with bearing D18 L37 S12mm

Ref: BGT90LK1-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
Out of stock, please inquire about delivery time
€84.00 -15% €71.40 
V-Groove cutter 45° L1(14) S12mm
  • -15%

V-Groove Bits

V-Groove cutter 45° L1(14) S12mm

Ref: VGC45L-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=38 A=45° L1=19 L2=25 B=25 S=12mm 
in stock
€91.00 -15% €77.35