Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::12 mm clear
  • Cutting length/height::19mm clear
  • Cutting length/height::L1(18) L2(35) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
Dovetail bit 10° D14 S8mm | Titman Tools
  • -15%

Dovetail bits

Dovetail bit 10° D14 S8mm

Ref: DC14-8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
in stock
€41.73 -15% €35.48 
Hinge Mortising Cutter TC 30 mm ENT 13422 | ENT
  • -20%

Surface trimming bits

Hinge Mortising Cutter TC 30 mm ENT 13422

Ref: ENT-13422
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
in stock
€43.00 -20% €34.40 
Replacement tip trimmer D19 L12 S8mm | Titman Tools
  • -15%

Flush trim bit

Replacement tip trimmer D19 L12 S8mm

Ref: BGT90-8RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€87.00 -15% €73.95 
Rounding over bit R6 S8mm | Titman Tools
  • -15%

Rounding over bits

Rounding over bit R6 S8mm

Ref: ROCB6-8
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€71.00 -15% €60.35 
Rounding over bit R12,7mm S12mm | Titman Tools
  • -15%

Rounding over bits

Rounding over bit R12,7mm S12mm

Ref: ROCB127-12
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€79.00 -15% €67.15 
Rounding over cutter R6.3 S6mm | Titman Tools
  • -15%

Rounding over bits

Rounding over cutter R6.3 S6mm

Ref: OC63-6
Rounding over cutter R6,3 S=6mm
in stock
€49.00 -15% €41.65 
Single flute cutter 10mm S12 for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Single flute cutter 10mm S12 for solid surface

Ref: XC001-10-12
Single flute cutter Z1 for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€43.00 -15% €36.55 
Single flute cutter D8 S12 for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Single flute cutter D8 S12 for solid surface

Ref: XC001-8-12
Groove cutter Z1 with diameter 8mm and shank 12mm.
Suitable for Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari
in stock
€38.20 -15% €32.47 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€22.00 -15% €18.70 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€12.00 -15% €10.20 
Spiral cutter Positiv for Plastics D3 L12 S3mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L12 S3mm

Ref: AC3-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€17.00 -15% €14.45 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Spiral cutter Z2 Positive - Upcut 3mm S3mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut 3mm S3mm

Ref: PK312-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
in stock
€34.50 -15% €29.33 
Straight Cutter HM Z2 D5 S8mm | ENT
  • -20%

Straight groove bits

Straight Cutter HM Z2 D5 S8mm

Ref: ENT-10356
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
in stock
€18.90 -20% €15.12 
Straight Cutter TC Z1 D6 S8mm | ENT
  • -20%

Straight groove bits

Straight Cutter TC Z1 D6 S8mm

Ref: ENT-10050
ENT Straight Cutter TC / One Flute with 8 mm shank
in stock
€16.00 -20% €12.80