Prices drop

Active filters

  • Shank:6mm clear
  • Cutting length/height::12 mm clear
  • Cutting length/height::19mm clear
Profile guide cutter D12,7 S6mm with bearing on shank | Titman Tools
  • -15%

Pattern bit / Top bearing straight bits

Profile guide cutter D12,7 S6mm with bearing on shank

Ref: PGC12719-6
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Out of stock, please inquire about delivery time
€55.00 -15% €46.75 
Rounding over cutter R6.3 S6mm | Titman Tools
  • -15%

Rounding over bits

Rounding over cutter R6.3 S6mm

Ref: OC63-6
Rounding over cutter R6,3 S=6mm
in stock
€49.00 -15% €41.65 
Spiral cutter Negative for Plastics D3 L12 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D5 L19 S6mm

Ref: AC5DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Negative for Plastics D6 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D6 L19 S6mm

Ref: AC6DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€22.00 -15% €18.70 
Spiral cutter Positiv for Plastics D5 L19 S6mm | Titman Tools
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D5 L19 S6mm

Ref: AC5-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€27.00 -15% €22.95 
Trimmer D18 S6mm negative axis angle | Titman Tools
  • -15%

Flush trim bit

Trimmer D18 S6mm negative axis angle

Ref: BGT90S-6
This results in a particularly clean result with thin coatings and long-fiber funnels.
Out of stock, please inquire about delivery time
€49.00 -15% €41.65 
Trimmer D19 mm L 12 mm S6 mm | Titman Tools
  • -15%

Flush trim bit

Trimmer D19 mm L 12 mm S6 mm

Ref: BGT90-6RT
1Bearing guide cutter for trimming protruding veneer and plastic edges.
in stock
€124.17 -15% €105.55