Prices drop

Active filters

  • Cutting length/height::12 mm clear
  • Cutting length/height::35mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(7mm) L2(17mm) clear
  • Cutters:2 clear
Cutterhead for 45 degrees bevels 150mm Bore 30mm YH131AAM-030
  • -21%

Cutterhead for Bevels

Cutterhead for 45 degrees bevels 150mm Bore 30mm YH131AAM-030

Ref: YH131AAM030
Body in light alloy execution. standard tungsten carbide reversible knives. precise 45 degrees bevel cuts on solid
wood and all types of board material. chip thickness limitation and reduced recoil. suitable for manual feed.
Out of stock, please inquire about delivery time
€171.00 -21% €135.09 
CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm
  • -21%

Cutterhead for Bevels

CUTTERHEAD FOR 45 degrees BEVELS 150mm Bore 40mm

Ref: YH131AAM040
Body in light alloy execution. standard tungsten carbide reversible knives. precise 45 degrees bevel cuts on solid
wood and all types of board material. chip thickness limitation and reduced recoil. suitable for manual feed.
Out of stock, please inquire about delivery time
€180.00 -21% €142.20 
Dovetail bit 10° D14 S8mm
  • -15%

Dovetail bits

Dovetail bit 10° D14 S8mm

Ref: DC14-8
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
in stock
€41.73 -15% €35.48 
Hinge Mortising Cutter TC 30 mm ENT 13422
  • -20%

Surface trimming bits

Hinge Mortising Cutter TC 30 mm ENT 13422

Ref: ENT-13422
Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas
in stock
€43.00 -20% €34.40 
Replacement tip trimmer D19 L12 S8mm
  • -15%

Flush trim bit

Replacement tip trimmer D19 L12 S8mm

Ref: BGT90-8RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€87.00 -15% €73.95 
Rounding over bit R6 S8mm
  • -15%

Rounding over bits

Rounding over bit R6 S8mm

Ref: ROCB6-8
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€71.00 -15% €60.35 
Rounding over cutter R5 S8mm
  • -15%

Rounding over bits

Rounding over cutter R5 S8mm

Ref: OC5-8
Rounding over cutter R5  S8mm
Out of stock, please inquire about delivery time
€80.00 -15% €68.00 
Rounding over cutter R6.3 S6mm
  • -15%

Rounding over bits

Rounding over cutter R6.3 S6mm

Ref: OC63-6
Rounding over cutter R6,3 S=6mm
in stock
€49.00 -15% €41.65 
Rounding over cutter R6.3 S8mm
  • -15%

Rounding over bits

Rounding over cutter R6.3 S8mm

Ref: OC63-8
Rounding over cutter R6.3  S8mm
Out of stock, please inquire about delivery time
€82.00 -15% €69.70 
Rounding over cutter with extended cutting edge R4 S8mm
  • -15%

Rounding over bits

Rounding over cutter with extended cutting edge R4 S8mm

Ref: SROCB4/127-8
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
Out of stock, please inquire about delivery time
€71.32 -15% €60.63 
Sinking cutter for solid surface
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€69.96 -15% €59.47 
Spiral cutter for aluminium Z2 D12 L35 S12mm
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D12 L35 S12mm

Ref: AL1235-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Out of stock, please inquire about delivery time
€140.00 -15% €119.00 
Spiral cutter for aluminium Z2 D3 L12 S3mm
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D3 L12 S3mm

Ref: AL312-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
Out of stock, please inquire about delivery time
€40.00 -15% €34.00 
Spiral cutter for aluminium Z2 D8 L35 S8mm
  • -15%

For Aluminum, ALUCOBOND, DiBOND, REYNOBOND

Spiral cutter for aluminium Z2 D8 L35 S8mm

Ref: AL835-2Z
Solid carbide milling cutter with rounded chip chamber and mirror grinding. Optimized cutting geometry for processing all non-ferrous metals.
in stock
€91.00 -15% €77.35 
Spiral cutter Negative for Plastics D3 L12 S6mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Negative for Plastics D3 L12 S6mm

Ref: AC3DC-6
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€25.00 -15% €21.25 
Spiral cutter Positiv for Plastics D3 L12 S1/4 inch
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L12 S1/4 inch

Ref: AC3-1/4
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€12.00 -15% €10.20 
Spiral cutter Positiv for Plastics D3 L12 S3mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Positiv for Plastics D3 L12 S3mm

Ref: AC3-3
Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
in stock
€17.00 -15% €14.45 
Spiral cutter Z2 Positive - Upcut D8 L35 S8mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut D8 L35 S8mm

Ref: PK835-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
in stock
€79.00 -15% €67.15 
Spiral cutter Z2 Positive - Upcut 10mm L 35mm S 10mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut 10mm L 35mm S 10mm

Ref: PK1035-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
Out of stock, please inquire about delivery time
€85.00 -15% €72.25 
Spiral cutter Z2 Positive - Upcut 12mm L 35mm S 12mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut 12mm L 35mm S 12mm

Ref: PK1235-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
Out of stock, please inquire about delivery time
€122.00 -15% €103.70 
Spiral cutter Z2 Positive - Upcut 3mm S3mm
  • -15%

Spiral milling cutters Z2

Spiral cutter Z2 Positive - Upcut 3mm S3mm

Ref: PK312-2RP
Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
in stock
€34.50 -15% €29.33