Prices drop

Active filters

  • Cutting length/height::9mm clear
  • Cutting length/height::17mm clear
  • Cutting length/height::22mm clear
  • Cutting length/height::44mm clear
  • Cutting length/height::L1(18) L2(35) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
  • Cutting length/height::L1(25mm) L2(29mm) clear
Bevel cutter 45° D63 S12mm
  • -15%

Chamfering bits

Bevel cutter 45° D63 S12mm

Ref: RPC45EL-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€141.00 -15% €119.85 
DP Rounding cutter 60 x 9 x 20+2KN R1 CCW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R1 CCW

Ref: S14103
DP Rounding cutter 60 x 9 x 20+2KN  R1 CCW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R1 CW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R1 CW

Ref: S14104
DP Rounding cutter 60 x 9 x 20+2KN  R1 CW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R1.5 CCW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R1.5 CCW

Ref: S14241
DP Rounding cutter 60 x 9 x 20+2KN  R1.5 CCW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R1.5 CW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R1.5 CW

Ref: S14242
DP Rounding cutter 60 x 9 x 20+2KN  R1.5 CW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R2 CCW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R2 CCW

Ref: S13874
DP Rounding cutter 60 x 9 x 20+2KN  R2  CCW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R2 CW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R2 CW

Ref: S13875
DP Rounding cutter 60 x 9 x 20+2KN  R2 CW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R3 CCW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R3 CCW

Ref: S13872
DP Rounding cutter 60 x 9 x 20+2KN  R3  CCW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
DP Rounding cutter 60 x 9 x 20+2KN R3 CW
  • -20%

Cutterheads for Biesse Machines

DP Rounding cutter 60 x 9 x 20+2KN R3 CW

Ref: S13873
DP Rounding cutter 60 x 9 x 20+2KN  R3  CW
AR80 corner rounding unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Eco-Line Mini D16 L44 S16mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D16 L44 S16mm PCD router cutter

Ref: P03850
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D18 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D18 L44 S20mm PCD router cutter

Ref: P03910
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D20 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D20 L44 S20mm PCD router cutter

Ref: P03970
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Engraving cutter 80° S8mm
  • -15%

V-Groove Bits

Engraving cutter 80° S8mm

Ref: VGC80-8
Engraving cutter 80°  Shank 8mm
in stock
€70.00 -15% €59.50 
Half round cutter R5 S8mm
  • -15%

Staff / corner bead bit

Half round cutter R5 S8mm

Ref: SBC5-8
Premium Half round cutter
in stock
€82.34 -15% €69.99 
Half round cutter R5 S12
  • -15%

Staff / corner bead bit

Half round cutter R5 S12

Ref: SBC5-12
Premium Half round cutter
in stock
€82.34 -15% €69.99 
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CCW N3401N0364

Ref: S12344
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
Overlapped trimmer 80x22x16+2KN CW N3401N0363
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CW N3401N0363

Ref: S12343
Overlapped trimmer 80x22x16+2KN CW N3401N0363
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
Profile cutter RBB
  • -15%

Profile cutter

Profile cutter RBB

Ref: RBB38-8
Profile cutter RBB
Out of stock, please inquire about delivery time
€138.00 -15% €117.30 
Rail- & Stile Cutter Chamfer TC. Type B 8 mm shank
  • -20%

Profile cutter

Rail- & Stile Cutter Chamfer TC. Type B 8 mm shank

Ref: ENT-17490
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts.
For woodthickness from 19 to 21 mm
in stock
€109.00 -20% €87.20 
Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank
  • -20%

Profile cutter

Rail- & Stile Cutter Chamfer TC. Type C 12 mm shank

Ref: ENT-17560
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts.
For woodthickness from 19 to 21 mm
in stock
€99.00 -20% €79.20 
Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank
  • -20%

Profile cutter

Rail- & Stile Cutter Chamfer TC. Type C 8 mm shank

Ref: ENT-17540
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts.
For woodthickness from 19 to 21 mm
in stock
€93.00 -20% €74.40