Prices drop

Active filters

  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::25,5mm clear
  • Cutting length/height::L1(18mm) L2(33mm) clear
  • Cutting length/height::L1(20mm) L2(25mm) clear
Bevel cutter with center tip 20° S8mm
  • -15%

Chamfering bits

Bevel cutter with center tip 20° S8mm

Ref: BCF20-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€76.00 -15% €64.60 
Glue joint cutter TC ENT 16430
  • -20%

Glue joint cutter

Glue joint cutter TC ENT 16430

Ref: ENT-16430
ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.
in stock
€62.00 -20% €49.60 
Tooling set for rounding and chamfering Bore 30mm YS118AZM-030
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 30mm YS118AZM-030

Ref: YS118AZM030
YS118 Bore 30mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€439.50 -21% €347.21 
Tooling set for rounding and chamfering Bore 40mm
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 40mm

Ref: YS118AZM040
Bore 40mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€469.50 -21% €370.91 
V-Groove cutter 45° L1(25,5) S12mm
  • -15%

V-Groove Bits

V-Groove cutter 45° L1(25,5) S12mm

Ref: VGC45EL-12
These cutters create a straight line of approx. 1 mm at the bottom.
D=51 A=45° L1=25,5 L2=35 B=35 S=12mm
Out of stock, please inquire about delivery time
€125.00 -15% €106.25