Prices drop

Active filters

  • Cutting length/height::5,2mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::L1(15mm) L2(20mm) clear
  • Cutting length/height::L1(20mm) L2(27mm) clear
Bevel cutter 45° D52 S12mm
  • -15%

Chamfering bits

Bevel cutter 45° D52 S12mm

Ref: RPC45L-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€110.00 -15% €93.50 
Bevel cutter with center tip 30° S8mm
  • -15%

Chamfering bits

Bevel cutter with center tip 30° S8mm

Ref: BCF30-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€78.00 -15% €66.30 
Tooling set for rounding and chamfering Bore 30mm YS118AZM-030
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 30mm YS118AZM-030

Ref: YS118AZM030
YS118 Bore 30mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€439.50 -21% €347.21 
Tooling set for rounding and chamfering Bore 40mm
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 40mm

Ref: YS118AZM040
Bore 40mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€469.50 -21% €370.91 
V-Groove cutter 22.5° S12mm
  • -15%

V-Groove Bits

V-Groove cutter 22.5° S12mm

Ref: VGC225-12
V-Groove cutter
Out of stock, please inquire about delivery time
€44.00 -15% €37.40 
V-Groove cutter 22.5° S8mm
  • -15%

V-Groove Bits

V-Groove cutter 22.5° S8mm

Ref: VGC225-8
These cutters create a straight line of approx. 1 mm at the bottom.
D=25 A°=22.5° L1=5,2 L2=12 B=13,5 S=8mm 
in stock
€53.80 -15% €45.73