Prices drop

Active filters

  • Cutting length/height::22mm clear
  • Cutting length/height::34mm clear
  • Cutting length/height::36mm clear
  • Cutting length/height::50mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(15mm) L2(20mm) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
Bevel cutter with center tip 30° S8mm
  • -15%

Chamfering bits

Bevel cutter with center tip 30° S8mm

Ref: BCF30-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€78.00 -15% €66.30 
Cutterhead variable angle 160mm Bore 30mm
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 30mm

Ref: TH17TM20030
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 31,75mm
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 31,75mm

Ref: TH17TM20031
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 35mm
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 35mm

Ref: TH17TM20035
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 40mm
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 40mm

Ref: TH17TM20040
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 50mm
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 50mm

Ref: TH17TM20050
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Engraving cutter 80° S8mm
  • -15%

V-Groove Bits

Engraving cutter 80° S8mm

Ref: VGC80-8
Engraving cutter 80°  Shank 8mm
in stock
€70.00 -15% €59.50 
Half round cutter R5 S8mm
  • -15%

Staff / corner bead bit

Half round cutter R5 S8mm

Ref: SBC5-8
Premium Half round cutter
in stock
€82.34 -15% €69.99 
Half round cutter R5 S12
  • -15%

Staff / corner bead bit

Half round cutter R5 S12

Ref: SBC5-12
Premium Half round cutter
in stock
€82.34 -15% €69.99 
High-Performance pre milling cutter DP 125x34x30+2KN LH
  • -20%

Cutterheads for Biesse Machines

High-Performance pre milling cutter DP 125x34x30+2KN LH

Ref: S14344
High-Performance pre milling cutter DP 125x34x30+2KN LH
RT20 / RT30 Pre-milling unit
Out of stock, please inquire about delivery time
€1,150.00 -20% €920.00 
High-Performance pre milling cutter DP 125x34x30+2KN RH
  • -20%

Cutterheads for Biesse Machines

High-Performance pre milling cutter DP 125x34x30+2KN RH

Ref: S14343
High-Performance pre milling cutter DP 125x34x30+2KN RH
RT20 / RT30 Pre-milling unit
Out of stock, please inquire about delivery time
€1,150.00 -20% €920.00 
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CCW N3401N0364

Ref: S12344
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
Overlapped trimmer 80x22x16+2KN CW N3401N0363
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CW N3401N0363

Ref: S12343
Overlapped trimmer 80x22x16+2KN CW N3401N0363
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
PCD router cutter D10 L36 S10mm Eco-Line Mini Z1+1 with HWM body
  • -20%

Eco-line

PCD router cutter D10 L36 S10mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0213
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€325.00 -20% €260.00 
PCD router cutter D12 L36 S12mm Eco-Line Mini Z1+1 with HWM body
  • -20%

Eco-line

PCD router cutter D12 L36 S12mm Eco-Line Mini Z1+1 with HWM body

Ref: ES0221
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
PCD router cutters with HWM body which provides greater resistance to vibrations and makes them less prone to breakage than the Eco-line Mini Z1+1.
Design

PCD tips
Cutting edge head in HWM
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 20 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€355.00 -20% €284.00 
Profile guide cutter D19 L50 S12mm with bearing on shank
  • -15%

Pattern bit / Top bearing straight bits

Profile guide cutter D19 L50 S12mm with bearing on shank

Ref: PGC19-12
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Out of stock, please inquire about delivery time
€121.00 -15% €102.85 
Rebate cutter light alloy body 125 x 50 mm Bore 30mm
  • -21%

Rebate cutterheads

Rebate cutter light alloy body 125 x 50 mm Bore 30mm

Ref: YH151AAM030
Cutterhead with tungsten carbide reversible knives and spurs, alternate axial angle for excellent cutting results,chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.
Suitable for CNC
Out of stock, please inquire about delivery time
€142.90 -21% €112.90 
Rebate cutter light alloy body 125 x 50 mm Bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter light alloy body 125 x 50 mm Bore 40mm

Ref: YH151AAM040
Cutterhead with tungsten carbide reversible knives and spurs, alternate axial angle for excellent cutting results,chip thickness limitation and reduced recoil, suitable for manual and mechanical feed.
Suitable for CNC
Out of stock, please inquire about delivery time
€163.50 -21% €129.17 
Rebate cutter steel body 125 x 50mm bore 30mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 30mm

Ref: TH02TM04030
Bore 30 mm. Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Out of stock, please inquire about delivery time
€160.10 -21% €126.48 
Rebate cutter steel body 125 x 50mm bore 31,75mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 31,75mm

Ref: TH02TM04031
Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Out of stock, please inquire about delivery time
€180.70 -21% €142.76 
Rebate cutter steel body 125 x 50mm bore 35mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 35mm

Ref: TH02TM04035
Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Out of stock, please inquire about delivery time
€180.70 -21% €142.76 
Rebate cutter steel body 125 x 50mm bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 40mm

Ref: TH02TM04040
Bore 40mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
in stock
€180.70 -21% €142.76 
Rebate cutter steel body 125 x 50mm bore 50mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 50mm

Ref: TH02TM04050
Bore 50mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
Out of stock, please inquire about delivery time
€180.70 -21% €142.76