Prices drop

Active filters

  • Cutting length/height::22mm clear
  • Cutting length/height::24,8mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(15mm) L2(23mm) clear
  • Cutting length/height::L1(25mm) L2(29mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Bevel cutter 45° D63 S12mm
  • -15%

Chamfering bits

Bevel cutter 45° D63 S12mm

Ref: RPC45EL-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€141.00 -15% €119.85 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm
  • -21%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
in stock
€210.00 -21% €165.90 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Engraving cutter 80° S8mm
  • -15%

V-Groove Bits

Engraving cutter 80° S8mm

Ref: VGC80-8
Engraving cutter 80°  Shank 8mm
in stock
€70.00 -15% €59.50 
Finishing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
Guttering cutter R12,7 S12mm
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
Half round cutter R5 S8mm
  • -15%

Staff / corner bead bit

Half round cutter R5 S8mm

Ref: SBC5-8
Premium Half round cutter
in stock
€82.34 -15% €69.99 
Half round cutter R5 S12
  • -15%

Staff / corner bead bit

Half round cutter R5 S12

Ref: SBC5-12
Premium Half round cutter
in stock
€82.34 -15% €69.99 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CCW N3401N0364

Ref: S12344
Overlapped trimmer 80x22x16+2KN CCW N3401N0364
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
Overlapped trimmer 80x22x16+2KN CW N3401N0363
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer 80x22x16+2KN CW N3401N0363

Ref: S12343
Overlapped trimmer 80x22x16+2KN CW N3401N0363
RS10 Rough trimming unit
Out of stock, please inquire about delivery time
€810.00 -20% €648.00 
Roughing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
Rounding over bit R15 S8mm
  • -15%

Rounding over bits

Rounding over bit R15 S8mm

Ref: ROCB15-8
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€91.00 -15% €77.35 
Rounding over bit R16 S8mm
  • -15%

Rounding over bits

Rounding over bit R16 S8mm

Ref: ROCB16-8
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€95.00 -15% €80.75