Prices drop

Active filters

  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::18 - 50 mm clear
  • Cutting length/height::24,8mm clear
  • Cutting length/height::L1(7mm) L2(13mm) clear
  • Cutting length/height::L1(7mm) L2(17mm) clear
  • Cutting length/height::L1(15mm) L2(20mm) clear
Bevel cutter 15° D65 S12mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter 15° D65 S12mm

Ref: RPC15L-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€114.40 -15% €97.24 
Bevel cutter with center tip 30° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 30° S8mm

Ref: BCF30-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€78.00 -15% €66.30 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm | Stark
  • -21%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
in stock
€210.00 -21% €165.90 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Guttering cutter R12,7 S12mm | Titman Tools
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
Tooling set for rounding and chamfering Bore 30mm YS118AZM-030 | Stark
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 30mm YS118AZM-030

Ref: YS118AZM030
YS118 Bore 30mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€439.50 -21% €347.21 
Tooling set for rounding and chamfering Bore 40mm | Stark
  • -21%

Cutterhead for Bevels

Tooling set for rounding and chamfering Bore 40mm

Ref: YS118AZM040
Bore 40mm.   
Cutterset consisting of two elements in light alloy execution. standard tungsten carbide reversible knives.for high precision planning and chamfering/rounding in one single working operation. adjustable formilling solid wood and all types of board material from 18-50 mm thickness (spacing rings included).chip thickness limitation and reduced recoil. suitable for manual feed.
The cutterheads are equipped with knives R4 / 45 degrees (608005/608006) while R 2. R 3. R 5. R 6 are optional.
in stock
€469.50 -21% €370.91