Prices drop

Active filters

  • Cutting length/height::6,5mm clear
  • Cutting length/height::26mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(12mm) L2(20mm) clear
  • Cutting length/height::L1(20mm) L2(25mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Bevel cutter with center tip 20° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 20° S8mm

Ref: BCF20-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€76.00 -15% €64.60 
Finishing cutter D14 S14mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN | Wirutex
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Roughing cutter D14 S14mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
Rounding over bit R20mm S12mm | Titman Tools
  • -15%

Rounding over bits

Rounding over bit R20mm S12mm

Ref: ROCB20-12
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€142.48 -15% €121.11 
Straight bit 2mm S8mm | Titman Tools
  • -15%

Straight groove bits

Straight bit 2mm S8mm

Ref: M26.5-8
Straight bit shank 8mm
in stock
€38.00 -15% €32.30 
Straight bit D2 L6,5 S6mm | Titman Tools
  • -15%

Straight groove bits

Straight bit D2 L6,5 S6mm

Ref: M26.5-6
Straight bit shank 6 mm
in stock
€38.00 -15% €32.30 
Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378

Ref: S12351
Tilted trimmer 70x6.5x16+2KN R=1 CCW N3401N0378
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377

Ref: S12350
Tilted trimmer 70x6.5x16+2KN R=1 CW N3401N0377
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380

Ref: S13053
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379

Ref: S13052
Tilted trimmer 70x6.5x16+2KN R=1.5 CW N3401N0379
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382

Ref: S13055
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381

Ref: S13054
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384

Ref: S13057
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383 | Wirutex
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383

Ref: S13056
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60