Prices drop

Active filters

  • Availability:In stock clear
  • Cutting length/height::3,95mm clear
  • Cutting length/height::50mm clear
  • Cutting length/height::L 14mm clear
Bevel cutter with guide pin 30° S8mm
  • -15%

Chamfering bits

Bevel cutter with guide pin 30° S8mm

Ref: CHCP30-8
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
in stock
€65.00 -15% €55.25 
Rebate cutter steel body 125 x 50mm bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 125 x 50mm bore 40mm

Ref: TH02TM04040
Bore 40mm.  Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood. chipboard. veneered and laminated panels. plywood. etc.The shear angle allows a better chip removal and a longer cutting edge life.
in stock
€180.70 -21% €142.76 
Rebate cutter steel body 180 x 50 mm bore 40mm
  • -21%

Rebate cutterheads

Rebate cutter steel body 180 x 50 mm bore 40mm

Ref: TH02TM06040
Cutterhead with HW reversible knives and spurs on both sides rebating and edging. Suitable for solid soft wood, chipboard, veneered and laminated panels, plywood, etc.The shear angle allows a better chip removal and a longer cutting edge life.
in stock
€275.00 -21% €217.25 
Replacement tip trimmer D19 L50 S12mm
  • -15%

Flush trim bit

Replacement tip trimmer D19 L50 S12mm

Ref: BGT90XL-12RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
in stock
€128.00 -15% €108.80 
Straight Cutter TC Z2 D12 L50 S12mm
  • -20%

Straight groove bits

Straight Cutter TC Z2 D12 L50 S12mm

Ref: ENT-10378
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
in stock
€29.50 -20% €23.60 
Trimmers with bearing D18 L50 S12mm
  • -15%

Flush trim bit

Trimmers with bearing D18 L50 S12mm

Ref: BGT90LK2-12
Bearing guide cutter for trimming protruding veneer and plastic edges. Also possible tocopy using a template. The small diameters are ideal for processing inside corners.
in stock
€104.00 -15% €88.40 
Trimming Cutter 19 x 50 mm ENT 13465
  • -20%

Flush trim bit

Trimming Cutter 19 x 50 mm ENT 13465

Ref: ENT-13465
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
in stock
€74.00 -20% €59.20