Prices drop

Active filters

  • Cutting length/height::13mm clear
  • Cutting length/height::31mm clear
  • Cutting length/height::44mm clear
  • Cutting length/height::97mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(10mm) L2(15mm) clear
  • Cutting length/height::L1(18) L2(35) clear
Bevel cutter with center tip 45° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 45° S8mm

Ref: BCF45-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€83.00 -15% €70.55 
Eco-Line Mini D16 L44 S16mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D16 L44 S16mm PCD router cutter

Ref: P03850
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D18 L44 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D18 L44 S20mm PCD router cutter

Ref: P03910
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D20 L44 S20mm PCD router cutter | Wirutex
  • -20%

Eco-line

Eco-Line Mini D20 L44 S20mm PCD router cutter

Ref: P03970
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Finger pull Cutter shank 10 mm | Titman Tools
  • -15%

Finger pull cutters / Handrail cutter

Finger pull Cutter shank 10 mm

Ref: FPC19-10
Finger pull Cutter shank 10 mm
Out of stock, please inquire about delivery time
€133.00 -15% €113.05 
Finger pull Cutter shank 12 mm | Titman Tools
  • -15%

Finger pull cutters / Handrail cutter

Finger pull Cutter shank 12 mm

Ref: FPC19-12
Finger pull Cutters
Out of stock, please inquire about delivery time
€133.00 -15% €113.05 
Finger pull Cutter shank 8 mm | Titman Tools
  • -15%

Finger pull cutters / Handrail cutter

Finger pull Cutter shank 8 mm

Ref: FPC19-8
Finger pull Cutters
Out of stock, please inquire about delivery time
€133.00 -15% €113.05 
Hob cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Hob cutter for solid surface

Ref: XC341-12
Hob cutter for solid surface
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€194.18 -15% €165.06 
LOW-NOISE "ECO" pre-milling cutter DP 125x97x30+2KN RH | Wirutex
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE "ECO" pre-milling cutter DP 125x97x30+2KN RH

Ref: S05237
LOW-NOISE "ECO" pre-milling cutter DP 125x97x30+2KN RH
RT20 / RT30 Pre-milling unit
Out of stock, please inquire about delivery time
€2,100.00 -20% €1,680.00 
Panel raising cutterhead steel body (Bottom) bore 30mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 30mm

Ref: TH48TM31030
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 35mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 35mm

Ref: TH48TM31035
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 40mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 40mm

Ref: TH48TM31040
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 50mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 50mm

Ref: TH48TM31050
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 30mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 30mm

Ref: TH48TM30030
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 35mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 35mm

Ref: TH48TM30035
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 40mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 40mm

Ref: TH48TM30040
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 50mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 50mm

Ref: TH48TM30050
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Rounding over bit R6.35 S8mm | Titman Tools
  • -15%

Rounding over bits

Rounding over bit R6.35 S8mm

Ref: ROCB63-8
Ballbearings diameter 16 mm and 12,7 mm included.
in stock
€75.00 -15% €63.75 
Sinking cutter for solid surface | Titman Tools
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€69.96 -15% €59.47