Prices drop

Active filters

  • Cutting length/height::44mm clear
  • Cutting length/height::60mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(6mm) L2(6mm) clear
  • Cutting length/height::L1(16mm) L2(45mm) clear
  • Cutting length/height::L1(18) L2(35) clear
Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch

Ref: YH156AAM031
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 30mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 30mm

Ref: YH156AAM030
Light alloy body. standard tungsten carbide profiled knives for high precision jointing of hardwood and softwood. chip thickness limitation and reduced recoil. suitable for manual feed. YH152AAM: along the grain joints. YH156AAM: across the grain joints.
Out of stock, please inquire about delivery time
€228.70 -21% €180.68 
Cross grain joint cutter 125X60 Z3 Bore 35mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 35mm

Ref: YH156AAM035
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 40mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 40mm

Ref: YH156AAM040
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 50mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 50mm

Ref: YH156AAM050
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
double rounding over bit R3 S8mm
  • -15%

Rounding over bits

double rounding over bit R3 S8mm

Ref: DCBR16-8
Double rounding over cutters are suitable for panels from 4mm to 9 mm thickness.Ideal for bevel trimming sheets of Trespa, Perspex, wood, Acrylics and hard plastics.
in stock
€86.00 -15% €73.10 
Eco-Line Mini D16 L44 S16mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D16 L44 S16mm PCD router cutter

Ref: P03850
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D18 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D18 L44 S20mm PCD router cutter

Ref: P03910
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D20 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D20 L44 S20mm PCD router cutter

Ref: P03970
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Finishing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Roughing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
Straight bit D16 L60 S12mm
  • -15%

Straight groove bits

Straight bit D16 L60 S12mm

Ref: M1660-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€92.00 -15% €78.20 
Straight bit D18 L60 S12mm
  • -15%

Straight groove bits

Straight bit D18 L60 S12mm

Ref: M1860-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€101.00 -15% €85.85 
Straight bit D20 L60 S12mm
  • -15%

Straight groove bits

Straight bit D20 L60 S12mm

Ref: M2060-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€108.00 -15% €91.80 
Straight cutter D18 L60 M10x1.5
  • -15%

Straight groove bits

Straight cutter D18 L60 M10x1.5

Ref: TM1860-M10
Straight cutter internal thread M10x1.5
in stock
€98.00 -15% €83.30 
Titman Replacement tip trimmer D19 L60 S12mm
  • -15%

Flush trim bit

Titman Replacement tip trimmer D19 L60 S12mm

Ref: BGT90EL-12RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Out of stock, please inquire about delivery time
€139.00 -15% €118.15