Prices drop

Active filters

  • Cutting length/height::5,2mm clear
  • Cutting length/height::44mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(8mm) L2(26mm) clear
Eco-Line Mini D16 L44 S16mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D16 L44 S16mm PCD router cutter

Ref: P03850
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D18 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D18 L44 S20mm PCD router cutter

Ref: P03910
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Eco-Line Mini D20 L44 S20mm PCD router cutter
  • -20%

Eco-line

Eco-Line Mini D20 L44 S20mm PCD router cutter

Ref: P03970
For contouring, boring and sizing panels in chipboard and MDF, unpolished or faced.
Design

PCD tips
HM tungsten carbide plunging tip
Positive and negative shear angle
Sharpening area: 1.0 mm
Feed speed: up to 15 m/min
Max. rpm: 18,000 – 24,000
Minimum material thickness 13 mm
Out of stock, please inquire about delivery time
€138.00 -20% €110.40 
Finishing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Roughing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
T-Slot cutter D28 L8 S12 mm
  • -15%

T-Slot cutter

T-Slot cutter D28 L8 S12 mm

Ref: TSS28-12
T-Slot cutter
Out of stock, please inquire about delivery time
€94.00 -15% €79.90 
V-Groove cutter 22.5° S12mm
  • -15%

V-Groove Bits

V-Groove cutter 22.5° S12mm

Ref: VGC225-12
V-Groove cutter
Out of stock, please inquire about delivery time
€44.00 -15% €37.40 
V-Groove cutter 22.5° S8mm
  • -15%

V-Groove Bits

V-Groove cutter 22.5° S8mm

Ref: VGC225-8
These cutters create a straight line of approx. 1 mm at the bottom.
D=25 A°=22.5° L1=5,2 L2=12 B=13,5 S=8mm 
in stock
€53.80 -15% €45.73 
Wirutex 125x44x30+2KN LOW-Noise ECO pre-milling cutter DP
  • -20%

Cutterheads for Biesse Machines

Wirutex 125x44x30+2KN LOW-Noise ECO pre-milling cutter DP

Ref: S12886
LOW-Noise ECO pre-milling cutter DP 125x44x30+2KN CSEN350048
RT20 / RT30 Pre-milling unit
Out of stock, please inquire about delivery time
€1,000.00 -20% €800.00 
Wirutex 125x44x30+2KN RHLOW-Noise ECO pre-milling cutter DP
  • -20%

Cutterheads for Biesse Machines

Wirutex 125x44x30+2KN RHLOW-Noise ECO pre-milling cutter DP

Ref: S13045
LOW-Noise ECO pre-milling cutter DP 125x44x30+2KN RH CSEN350069
RT20 / RT30 pre-milling unit
Out of stock, please inquire about delivery time
€1,080.00 -20% €864.00 
Wirutex 125x44x30+2KN LOW-Noise ECO pre-milling cutter DP
  • -20%

Cutterheads for Biesse Machines

Wirutex 125x44x30+2KN LOW-Noise ECO pre-milling cutter DP

Ref: S12896
LOW-Noise ECO pre-milling cutter DP 125x44x30+2KN CSEN350049
RT20 / RT30 Pre milling unit
Out of stock, please inquire about delivery time
€1,140.00 -20% €912.00