Prices drop

Active filters

  • Cutting length/height::5mm clear
  • Cutting length/height::24,8mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(7mm) L2(17mm) clear
  • Cutting length/height::L1(25mm) L2(29mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
  • Cutting length/height::L1(35mm) L2(44mm) clear
Bevel cutter 45° D63 S12mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter 45° D63 S12mm

Ref: RPC45EL-12
Bevel cutter S=12 with high diameter
Out of stock, please inquire about delivery time
€141.00 -15% €119.85 
concave and convex quarter rounds (R4-6-8 included) Bore 30mm | Stark
  • -21%

Quater round cutterheads

concave and convex quarter rounds (R4-6-8 included) Bore 30mm

Ref: YS105BZM030
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
in stock
€210.00 -21% €165.90 
Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 31,75mm

Ref: YS105BZM031
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 35mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 35mm

Ref: YS105BZM035
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 40mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 40mm

Ref: YS105BZM040
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloycutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Concave and convex quarter rounds (R4-6-8 included) Bore 50mm | Stark
  • -21%

Quater round cutterheads

Concave and convex quarter rounds (R4-6-8 included) Bore 50mm

Ref: YS105BZM050
This set was designed to produce a variety of concave and convex rounds.It consists of a light alloy
cutterhead with two R 4 mm knives mounted on the tool and four spare R 6 and R 8 mm knives.
Out of stock, please inquire about delivery time
€280.00 -21% €221.20 
Engraving cutter for plastics Z1 60° D6 S6mm | Titman Tools
  • -15%

V-Groove Bits

Engraving cutter for plastics Z1 60° D6 S6mm

Ref: AV660-1R
Engraving cutter for plastics Z1 
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
Out of stock, please inquire about delivery time
€55.00 -15% €46.75 
Finishing cutter D14 S14mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
Grooving cutterhead 140 x 5 Z4 V4 Bore 30mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140 x 5 Z4 V4 Bore 30mm

Ref: TH37TM12-30
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€362.60 -21% €286.46 
Grooving cutterhead 140 x 5 Z4 V4 Bore 40mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140 x 5 Z4 V4 Bore 40mm

Ref: TH37TM12-40
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€362.60 -21% €286.46 
Grooving cutterhead 140 x 5 Z4 V4 Bore 50mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140 x 5 Z4 V4 Bore 50mm

Ref: TH37TM12-50
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€362.60 -21% €286.46 
Guttering cutter R12,7 S12mm | Titman Tools
  • -15%

Flute & bead bit

Guttering cutter R12,7 S12mm

Ref: TSB254-12
Guttering cutter
Out of stock, please inquire about delivery time
€96.00 -15% €81.60 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN | Wirutex
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Roughing cutter D14 S14mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3 | Titman Tools
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
Side slotting cutter 5mm Z2 Shank 12 mm | Titman Tools
  • -15%

Slotting cutters

Side slotting cutter 5mm Z2 Shank 12 mm

Ref: SL5-12
Side slotting cutter Shank 12 mm
Out of stock, please inquire about delivery time
€67.00 -15% €56.95 
Side slotting cutter Z2 5mm S8mm | Titman Tools
  • -15%

Slotting cutters

Side slotting cutter Z2 5mm S8mm

Ref: SL5-8
Side slotting cutter Shank 8 mm
Out of stock, please inquire about delivery time
€67.00 -15% €56.95 
Spiral cutter Z1 Negative - Down cut D1,5 L5 S3 mm | Titman Tools
  • -15%

Spiral milling cutters Z1

Spiral cutter Z1 Negative - Down cut D1,5 L5 S3 mm

Ref: PK155-1RN
Spiral cutter Z1 Negative - Down cut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
Out of stock, please inquire about delivery time
€34.00 -15% €28.90 
Spiral cutter Z1 Positive - Upcut D1.5 L5 S3mm | Titman Tools
  • -15%

Spiral milling cutters Z1

Spiral cutter Z1 Positive - Upcut D1.5 L5 S3mm

Ref: PK155-1RP
Spiral cutter Z1 Positive - Upcut for Plastics
Suitable for:

Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
Out of stock, please inquire about delivery time
€34.00 -15% €28.90