Prices drop

Active filters

  • Cutting length/height::6,5mm clear
  • Cutting length/height::65 mm clear
  • Cutting length/height::L1(3,2mm) L2(11mm) clear
  • Cutting length/height::L1(3,2mm) L2(11mm) clear
  • Cutting length/height::L1(3,2mm) L2(11mm) clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(15mm) L2(20mm) clear
Bevel cutter 30° S8mm with bearing
  • -15%

Chamfering bits

Bevel cutter 30° S8mm with bearing

Ref: BGT30-8
Bevel cutter with bearing
Out of stock, please inquire about delivery time
€79.00 -15% €67.15 
Bevel cutter 45° S6mm with bearing
  • -15%

Chamfering bits

Bevel cutter 45° S6mm with bearing

Ref: BGT45-6
Bevel cutter with bearing
Out of stock, please inquire about delivery time
€79.00 -15% €67.15 
Bevel cutter 45° S8mm with bearing
  • -15%

Chamfering bits

Bevel cutter 45° S8mm with bearing

Ref: BGT45-8
Bevel cutter with bearing
Out of stock, please inquire about delivery time
€79.00 -15% €67.15 
Bevel cutter with center tip 30° S8mm
  • -15%

Chamfering bits

Bevel cutter with center tip 30° S8mm

Ref: BCF30-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€78.00 -15% €66.30 
Finishing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D14 S14mm for through-hole milling Z3

Ref: SLF14120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€255.00 -15% €216.75 
Finishing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D16 S16mm for through-hole milling Z3

Ref: SLF16120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€290.00 -15% €246.50 
Finishing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Finishing cutter D18 S18mm for through-hole milling Z3

Ref: SLF18120-3RS
Finishing cutter for through-hole milling Z3
For spy hole milling and through holes
Out of stock, please inquire about delivery time
€340.00 -15% €289.00 
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN

Ref: S12805
LOW-NOISE 45 degrees pre-milling cutter 80x65x30+2KN.
RT02 pre-milling unit
Out of stock, please inquire about delivery time
€663.00 -20% €530.40 
Roughing cutter D14 S14mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D14 S14mm for through-hole milling Z3

Ref: DLF14120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€262.00 -15% €222.70 
Roughing cutter D16 S16mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D16 S16mm for through-hole milling Z3

Ref: DLF16120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€299.00 -15% €254.15 
Roughing cutter D18 S18mm for through-hole milling Z3
  • -15%

Window and door tooling

Roughing cutter D18 S18mm for through-hole milling Z3

Ref: DLF18120-3RS
Roughing cutter for through-hole milling Z3
For pusher hole drilling and lock cylinder milling
Out of stock, please inquire about delivery time
€347.00 -15% €294.95 
Sinking cutter for solid surface
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€69.96 -15% €59.47 
Straight bit 2mm S8mm
  • -15%

Straight groove bits

Straight bit 2mm S8mm

Ref: M26.5-8
Straight bit shank 8mm
in stock
€38.00 -15% €32.30 
Straight bit D2 L6,5 S6mm
  • -15%

Straight groove bits

Straight bit D2 L6,5 S6mm

Ref: M26.5-6
Straight bit shank 6 mm
in stock
€38.00 -15% €32.30 
Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378

Ref: S12351
Tilted trimmer 70x6.5x16+2KN R=1 CCW N3401N0378
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377

Ref: S12350
Tilted trimmer 70x6.5x16+2KN R=1 CW N3401N0377
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380

Ref: S13053
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379

Ref: S13052
Tilted trimmer 70x6.5x16+2KN R=1.5 CW N3401N0379
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382

Ref: S13055
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381

Ref: S13054
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384

Ref: S13057
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383

Ref: S13056
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60