Prices drop

Active filters

  • Cutting length/height::6,5mm clear
  • Cutting length/height::60mm clear
  • Cutting length/height::L1(3mm) L2(15mm) clear
  • Cutting length/height::L1(15,6mm) L2(20mm) clear
Bevel cutter 45° D44 S8mm
  • -15%

Chamfering bits

Bevel cutter 45° D44 S8mm

Ref: RPC4522-8
Bevel cutter S=8 with high diameter
Out of stock, please inquire about delivery time
€108.00 -15% €91.80 
Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 1-1/4 inch

Ref: YH156AAM031
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 30mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 30mm

Ref: YH156AAM030
Light alloy body. standard tungsten carbide profiled knives for high precision jointing of hardwood and softwood. chip thickness limitation and reduced recoil. suitable for manual feed. YH152AAM: along the grain joints. YH156AAM: across the grain joints.
Out of stock, please inquire about delivery time
€228.70 -21% €180.68 
Cross grain joint cutter 125X60 Z3 Bore 35mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 35mm

Ref: YH156AAM035
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 40mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 40mm

Ref: YH156AAM040
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Cross grain joint cutter 125X60 Z3 Bore 50mm
  • -21%

lock miter / jointing cutter heads

Cross grain joint cutter 125X60 Z3 Bore 50mm

Ref: YH156AAM050
Stark cross grain joint cutter 125X60 Z=3 YH156AAM
Out of stock, please inquire about delivery time
€249.30 -21% €196.95 
Sinking cutter for solid surface
  • -15%

For corian / HIMACS

Sinking cutter for solid surface

Ref: XC206-12
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
Suitable for

Corian
Hi-Macs
Staron
Avonite
Hanex
Varicor
domovari
in stock
€69.96 -15% €59.47 
Straight bit 2mm S8mm
  • -15%

Straight groove bits

Straight bit 2mm S8mm

Ref: M26.5-8
Straight bit shank 8mm
in stock
€38.00 -15% €32.30 
Straight bit D16 L60 S12mm
  • -15%

Straight groove bits

Straight bit D16 L60 S12mm

Ref: M1660-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€92.00 -15% €78.20 
Straight bit D18 L60 S12mm
  • -15%

Straight groove bits

Straight bit D18 L60 S12mm

Ref: M1860-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€101.00 -15% €85.85 
Straight bit D2 L6,5 S6mm
  • -15%

Straight groove bits

Straight bit D2 L6,5 S6mm

Ref: M26.5-6
Straight bit shank 6 mm
in stock
€38.00 -15% €32.30 
Straight bit D20 L60 S12mm
  • -15%

Straight groove bits

Straight bit D20 L60 S12mm

Ref: M2060-12
Straight bit shank 12 mm
Out of stock, please inquire about delivery time
€108.00 -15% €91.80 
Straight cutter D18 L60 M10x1.5
  • -15%

Straight groove bits

Straight cutter D18 L60 M10x1.5

Ref: TM1860-M10
Straight cutter internal thread M10x1.5
in stock
€98.00 -15% €83.30 
Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CCW N3401N0378

Ref: S12351
Tilted trimmer 70x6.5x16+2KN R=1 CCW N3401N0378
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1 CW N3401N0377

Ref: S12350
Tilted trimmer 70x6.5x16+2KN R=1 CW N3401N0377
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380

Ref: S13053
Tilted trimmer 70x6.5x16+2KN R1.5 CCW N3401N0380
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R1.5 CW N3401N0379

Ref: S13052
Tilted trimmer 70x6.5x16+2KN R=1.5 CW N3401N0379
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382

Ref: S13055
Tilted trimmer 70x6.5x16+2KN R2 CCW N3401N0382
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381

Ref: S13054
Tilted trimmer 70x6.5x16+2KN R2 CW N3401N0381
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384

Ref: S13057
Tilted trimmer 70x6.5x16+2KN R3 CCW N3401N0384
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383
  • -20%

Cutterheads for Biesse Machines

Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383

Ref: S13056
Tilted trimmer 70x6.5x16+2KN R3 CW N3401N0383
RF10 fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Titman Replacement tip trimmer D19 L60 S12mm
  • -15%

Flush trim bit

Titman Replacement tip trimmer D19 L60 S12mm

Ref: BGT90EL-12RT
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Out of stock, please inquire about delivery time
€139.00 -15% €118.15