Prices drop

Active filters

  • Cutting length/height::8 - 28mm clear
  • Cutting length/height::11-22mm clear
  • Cutting length/height::38mm clear
Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm
  • -21%

Grooving cutterheads

Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 30mm

Ref: TH09TM20030
Bore 30mm
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
Out of stock, please inquire about delivery time
€402.60 -21% €318.06 
Double rounding over / chamfer bit adjustable R2.5 45° S8mm
  • -15%

Rounding over bits

Double rounding over / chamfer bit adjustable R2.5 45° S8mm

Ref: ROS22-8
Cutter for chamfering of material thicknesses from 11 to 22 mm. The cutter isadjusted to the material thickness with the included spacers. By replacing the profile parts. a double rounding cutter is possible.
in stock
€129.74 -15% €110.28 
Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm
  • -21%

Grooving cutterheads

Stark Adjustable Grooving set TYPE A + B - 160 x 8-28 mm Bore 40mm

Ref: TH09TM20040
Cutterhead with steel body. tungsten carbide standard reversible knives and spurs. adjustable with 1/10mm spacing rings (included) for high precision groove cutting. chip thickness limitation and reducedrecoil. suitable for manual and mechanical feed.
Grooves 8 to 28 mm
in stock
€443.80 -21% €350.61 
Trimmer D12.7 L38 S12mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S12mm with double bearing

Ref: BGT903LK-12
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65 
Trimmer D12.7 L38 S8mm with double bearing
  • -15%

Flush trim bit

Trimmer D12.7 L38 S8mm with double bearing

Ref: BGT903LK-8
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Out of stock, please inquire about delivery time
€109.00 -15% €92.65