Prices drop

Active filters

  • Cutting length/height::8mm clear
  • Cutting length/height::31mm clear
  • Cutting length/height::49mm clear
  • Cutting length/height::50mm clear
  • Cutting length/height::L1(14mm) L2(32mm) clear
  • Cutting length/height::L1(14mm) L2(32mm) clear
  • Cutting length/height::L1(19mm) L2(27mm) clear
  • Cutting length/height::L1(20mm) L2(25mm) clear
Bevel cutter 45° S12mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter 45° S12mm

Ref: CEC45L-12
For folding, profiling and formatting in one operation.
Out of stock, please inquire about delivery time
€143.00 -15% €121.55 
Bevel cutter with center tip 20° S8mm | Titman Tools
  • -15%

Chamfering bits

Bevel cutter with center tip 20° S8mm

Ref: BCF20-8
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Out of stock, please inquire about delivery time
€76.00 -15% €64.60 
Cutterhead variable angle 160mm Bore 30mm | Stark
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 30mm

Ref: TH17TM20030
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 31,75mm | Stark
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 31,75mm

Ref: TH17TM20031
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 35mm | Stark
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 35mm

Ref: TH17TM20035
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 40mm | Stark
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 40mm

Ref: TH17TM20040
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
Cutterhead variable angle 160mm Bore 50mm | Stark
  • -21%

Cutterhead for Bevels

Cutterhead variable angle 160mm Bore 50mm

Ref: TH17TM20050
Stark cutterhead variable angle 160mm
Out of stock, please inquire about delivery time
€425.00 -21% €335.75 
EPROCUT Rounding over bit HW R2 S8 | Titman Tools
  • -15%

Rounding over bits

EPROCUT Rounding over bit HW R2 S8

Ref: E-11215
EPROCUT Rounding over bit HW Z=2 D=16,7 R=2 L=8 GL=40 S=8
in stock
€24.00 -15% €20.40 
Grooving cutterhead 140x8 Z4 V4 bore 30mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140x8 Z4 V4 bore 30mm

Ref: TH38TM11-30
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€332.90 -21% €263.00 
Grooving cutterhead 140x8 Z4 V4 bore 40mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140x8 Z4 V4 bore 40mm

Ref: TH38TM11-40
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€332.90 -21% €263.00 
Grooving cutterhead 140x8 Z4 V4 bore 50mm | Stark
  • -21%

Grooving cutterheads

Grooving cutterhead 140x8 Z4 V4 bore 50mm

Ref: TH38TM11-50
Cutterhead with HW reversible knives and spurs for making thin precision grooves  
Out of stock, please inquire about delivery time
€332.90 -21% €263.00 
LOW-NOISE 45 degrees pre-milling cutter 80x49x30+2KN | Wirutex
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45 degrees pre-milling cutter 80x49x30+2KN

Ref: S13076
LOW-NOISE 45 degrees pre-milling cutter 80x49x30+2KN.
RT02 pre milling unit
Out of stock, please inquire about delivery time
€530.00 -20% €424.00 
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 | Wirutex
  • -20%

Cutterheads for Biesse Machines

LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085

Ref: S13165
LOW-NOISE 45° pre-milling cutter 80x49x30+2KN CSEN350085 for Biesse Machines.
RT02 pre milling unit
Out of stock, please inquire about delivery time
€660.00 -20% €528.00 
Overlapped trimmer with DP knives 70x8x16+2KN | Wirutex
  • -20%

Cutterheads for Biesse Machines

Overlapped trimmer with DP knives 70x8x16+2KN

Ref: S09643
Overlapped trimmer with DP knives 70x8x16+2KN
RF10 Fine trimming unit
Out of stock, please inquire about delivery time
€382.00 -20% €305.60 
Panel raising cutterhead steel body (Bottom) bore 30mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 30mm

Ref: TH48TM31030
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 35mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 35mm

Ref: TH48TM31035
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 40mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 40mm

Ref: TH48TM31040
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Bottom) bore 50mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Bottom) bore 50mm

Ref: TH48TM31050
Steel body with tungsten carbide profiled knives, for high precision panel raising
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 30mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 30mm

Ref: TH48TM30030
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 35mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 35mm

Ref: TH48TM30035
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 40mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 40mm

Ref: TH48TM30040
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Panel raising cutterhead steel body (Top) bore 50mm | Stark
  • -21%

Raised panel cutters

Panel raising cutterhead steel body (Top) bore 50mm

Ref: TH48TM30050
Steel body with tungsten carbide profiled knives, for high precision panel raising,
Out of stock, please inquire about delivery time
€377.00 -21% €297.83 
Profile cutter BCC8 | Titman Tools
  • -15%

Profile cutter

Profile cutter BCC8

Ref: BCC8-8
Profile cutter BCC8
Out of stock, please inquire about delivery time
€94.00 -15% €79.90 
Profile cutter OG D9,5 S8mm | Titman Tools
  • -15%

Profile cutter

Profile cutter OG D9,5 S8mm

Ref: OG95-8
Profile cutter OG  D9,5 S8mm
in stock
€74.00 -15% €62.90