JVL pro-line solid carbide...
JVL pro-line solid carbide flush trim bit S8mm
JVL pro-line solid carbide flush trim bit S8mm
Filtrar por
Disponibilidad
Diámetro de conexión
Diámetro (D)
Longitud del cortador - altura
Largo total
Radio/ángulo
Cortadores
Flush trim bit
Hay 42 productos.
JVL pro-line solid carbide flush trim bit S8mm
JVL pro-line solid carbide flush trim bit S8mm
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 6 x 19 x 64 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Fresa con guía de rodamientos para recortar los bordes...
Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.
Trimmers with bearing
Trimmers with bearing
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
This results in a particularly clean result with thin coatings...
This results in a particularly clean result with thin coatings and long-fiber funnels.
Trimmers with bearing
Trimmers with bearing
Fresa con guía de rodamientos para recortar los bordes...
Fresa con guía de rodamientos para recortar los bordes salientes de chapa y plástico. También es posible copiar usando una plantilla. Los diámetros pequeños son ideales para procesar esquinas interiores.
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Bearing guide cutter with three cutting edges for particularly...
Bearing guide cutter with three cutting edges for particularly fine milling results.Equipped with two ball bearings to make prints on sensitive workpieces to avoid.
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank...
Trimming Cutter TC with Shear Cutting Angle and 12 mm shank ENT 13465
Trimmers with bearing
Trimmers with bearing
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Trimmers with bearing
Trimmers with bearing
for simultaneous machining of top and bottom edges. For...
for simultaneous machining of top and bottom edges. For material thickness up to 30 mm thickness.
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Flush trim bit