close

Fraise pour Corian, Hi-Macs, Staron, Avonite, Hanex, Varicor, domovari

 

Ces fraises sont dotées d'une nuance de carbure spéciale pour faciliter le traitement des matières minérales. Cela permet d'usiner les plaques de manière efficace et précise.

View Left Column
Filtrer

76 products

Grid
Grid-2
List
List-2
Catelog
Trier par :
Ventes, ordre décroissantPertinenceNom, A à ZNom, Z à APrix, croissantPrix, décroissantRéférence, A à ZRéférence, Z à A
Filtrer

Disponibilité

Disponibilité

Épaisseur

Épaisseur

Diamètre (D)

Diamètre (D)

Longueur de coupe - hauteur

Longueur de coupe - hauteur

Longueur totale

Longueur totale

Rayon/angle

Rayon/angle

Coupeurs

Coupeurs

Filtres actifs

  • new
  • -15%
Pour corian / HIMACS
Single flute cutter D8 S12 for solid surface
32,30 €38,00 €
Single flute cutter D8 S12 for solid surfaceSingle flute cutter D8 S12 for solid surface
  • new
    Pour corian / HIMACS
    Single flute cutter D8 S12 for solid surface
    32,30 €38,00 €
    Single flute cutter D8 S12 for solid surfaceSingle flute cutter D8 S12 for solid surface
    • new
      Pour corian / HIMACS
      Single flute cutter D8 S12 for solid surface
      Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
      32,30 €38,00 €Prix de base-15% offPrix
      En stock 1 Articles
      Single flute cutter D8 S12 for solid surfaceSingle flute cutter D8 S12 for solid surface
      • Nouveau
        Pour corian / HIMACS
        Single flute cutter D8 S12 for solid surface
        Single flute cutter Z=1 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
        En stock 1 Articles
        32,30 €38,00 €Prix de base-15% offPrix
        • new
        • -15%
        Pour corian / HIMACS
        Single flute cutter Z2 Negative D10 L19 S12mm
        35,70 €42,00 €
        Single flute cutter Z2 Negative D10 L19 S12mm
        • new
          Pour corian / HIMACS
          Single flute cutter Z2 Negative D10 L19 S12mm
          35,70 €42,00 €
          Single flute cutter Z2 Negative D10 L19 S12mm
          • new
            Pour corian / HIMACS
            Single flute cutter Z2 Negative D10 L19 S12mm
            Single flute cutter Z=2 Negative for solid surface
            35,70 €42,00 €Prix de base-15% offPrix
            En stock 1 Articles
            Single flute cutter Z2 Negative D10 L19 S12mm
            • Nouveau
              Pour corian / HIMACS
              Single flute cutter Z2 Negative D10 L19 S12mm
              Single flute cutter Z=2 Negative for solid surface
              En stock 1 Articles
              35,70 €42,00 €Prix de base-15% offPrix
              • new
              • -15%
              Pour corian / HIMACS
              Single flute cutter 12,7mm S12 for solid surface
              36,55 €43,00 €
              Single flute cutter 12,7mm S12 for solid surface
              • new
                Pour corian / HIMACS
                Single flute cutter 12,7mm S12 for solid surface
                36,55 €43,00 €
                Single flute cutter 12,7mm S12 for solid surface
                • new
                  Pour corian / HIMACS
                  Single flute cutter 12,7mm S12 for solid surface
                  Single flute cutter Z=1 for solid surface
                  36,55 €43,00 €Prix de base-15% offPrix
                  En stock 1 Articles
                  Single flute cutter 12,7mm S12 for solid surface
                  • Nouveau
                    Pour corian / HIMACS
                    Single flute cutter 12,7mm S12 for solid surface
                    Single flute cutter Z=1 for solid surface
                    En stock 1 Articles
                    36,55 €43,00 €Prix de base-15% offPrix
                    • new
                    • -15%
                    Pour corian / HIMACS
                    Single flute cutter 10mm S12 for solid surface
                    36,55 €43,00 €
                    Single flute cutter 10mm S12 for solid surface
                    • new
                      Pour corian / HIMACS
                      Single flute cutter 10mm S12 for solid surface
                      36,55 €43,00 €
                      Single flute cutter 10mm S12 for solid surface
                      • new
                        Pour corian / HIMACS
                        Single flute cutter 10mm S12 for solid surface
                        Single flute cutter Z=1 for solid surface
                        36,55 €43,00 €Prix de base-15% offPrix
                        En stock 2 Articles
                        Single flute cutter 10mm S12 for solid surface
                        • Nouveau
                          Pour corian / HIMACS
                          Single flute cutter 10mm S12 for solid surface
                          Single flute cutter Z=1 for solid surface
                          En stock 2 Articles
                          36,55 €43,00 €Prix de base-15% offPrix
                          • new
                          • -15%
                          Pour corian / HIMACS
                          Single flute cutter Z2 Negative D12.7 L19 S12mm
                          39,10 €46,00 €
                          Single flute cutter Z2 Negative D12.7 L19 S12mm
                          • new
                            Pour corian / HIMACS
                            Single flute cutter Z2 Negative D12.7 L19 S12mm
                            39,10 €46,00 €
                            Single flute cutter Z2 Negative D12.7 L19 S12mm
                            • new
                              Pour corian / HIMACS
                              Single flute cutter Z2 Negative D12.7 L19 S12mm
                              Single flute cutter Z=2 Negative for solid surface
                              39,10 €46,00 €Prix de base-15% offPrix
                              En stock 1 Articles
                              Single flute cutter Z2 Negative D12.7 L19 S12mm
                              • Nouveau
                                Pour corian / HIMACS
                                Single flute cutter Z2 Negative D12.7 L19 S12mm
                                Single flute cutter Z=2 Negative for solid surface
                                En stock 1 Articles
                                39,10 €46,00 €Prix de base-15% offPrix
                                • new
                                • -15%
                                Pour corian / HIMACS
                                Single flute cutter 10mm Z2 Negative for solid surface
                                41,65 €49,00 €
                                Single flute cutter 10mm Z2 Negative for solid surface
                                • new
                                  Pour corian / HIMACS
                                  Single flute cutter 10mm Z2 Negative for solid surface
                                  41,65 €49,00 €
                                  Single flute cutter 10mm Z2 Negative for solid surface
                                  • new
                                    Pour corian / HIMACS
                                    Single flute cutter 10mm Z2 Negative for solid surface
                                    Single flute cutter Z=2 Negative for solid surface
                                    41,65 €49,00 €Prix de base-15% offPrix
                                    En rupture de stock (se renseigner sur le délai de livraison)
                                    Single flute cutter 10mm Z2 Negative for solid surface
                                    • Nouveau
                                      Pour corian / HIMACS
                                      Single flute cutter 10mm Z2 Negative for solid surface
                                      Single flute cutter Z=2 Negative for solid surface
                                      En rupture de stock (se renseigner sur le délai de livraison)
                                      41,65 €49,00 €Prix de base-15% offPrix
                                      • new
                                      • -15%
                                      Pour corian / HIMACS
                                      Bearing guide trimmer D6.35 S12mm for solid surface
                                      43,30 €50,93 €
                                      Bearing guide trimmer D6.35 S12mm for solid surfaceBearing guide trimmer D6.35 S12mm for solid surface
                                      • new
                                        Pour corian / HIMACS
                                        Bearing guide trimmer D6.35 S12mm for solid surface
                                        43,30 €50,93 €
                                        Bearing guide trimmer D6.35 S12mm for solid surfaceBearing guide trimmer D6.35 S12mm for solid surface
                                        • new
                                          Pour corian / HIMACS
                                          Bearing guide trimmer D6.35 S12mm for solid surface
                                          Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
                                          43,30 €50,93 €Prix de base-15% offPrix
                                          En rupture de stock (se renseigner sur le délai de livraison)
                                          Bearing guide trimmer D6.35 S12mm for solid surfaceBearing guide trimmer D6.35 S12mm for solid surface
                                          • Nouveau
                                            Pour corian / HIMACS
                                            Bearing guide trimmer D6.35 S12mm for solid surface
                                            Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
                                            En rupture de stock (se renseigner sur le délai de livraison)
                                            43,30 €50,93 €Prix de base-15% offPrix
                                            • new
                                            • -15%
                                            Pour corian / HIMACS
                                            Single flute cutter 12,7mm Z2 Negative for solid surface
                                            44,20 €52,00 €
                                            Single flute cutter 12,7mm Z2 Negative for solid surface
                                            • new
                                              Pour corian / HIMACS
                                              Single flute cutter 12,7mm Z2 Negative for solid surface
                                              44,20 €52,00 €
                                              Single flute cutter 12,7mm Z2 Negative for solid surface
                                              • new
                                                Pour corian / HIMACS
                                                Single flute cutter 12,7mm Z2 Negative for solid surface
                                                Single flute cutter Z=2 Negative for solid surface
                                                44,20 €52,00 €Prix de base-15% offPrix
                                                En stock 1 Articles
                                                Single flute cutter 12,7mm Z2 Negative for solid surface
                                                • Nouveau
                                                  Pour corian / HIMACS
                                                  Single flute cutter 12,7mm Z2 Negative for solid surface
                                                  Single flute cutter Z=2 Negative for solid surface
                                                  En stock 1 Articles
                                                  44,20 €52,00 €Prix de base-15% offPrix
                                                  • new
                                                  • -15%
                                                  Pour corian / HIMACS
                                                  Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                  49,30 €58,00 €
                                                  Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surfaceBearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                  • new
                                                    Pour corian / HIMACS
                                                    Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                    49,30 €58,00 €
                                                    Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surfaceBearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                    • new
                                                      Pour corian / HIMACS
                                                      Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                      Bearing guide trimmer double bearing for solid surface
                                                      49,30 €58,00 €Prix de base-15% offPrix
                                                      En rupture de stock (se renseigner sur le délai de livraison)
                                                      Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surfaceBearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                      • Nouveau
                                                        Pour corian / HIMACS
                                                        Bearing guide trimmer D12,7 L19 S12mm double bearing for solid surface
                                                        Bearing guide trimmer double bearing for solid surface
                                                        En rupture de stock (se renseigner sur le délai de livraison)
                                                        49,30 €58,00 €Prix de base-15% offPrix
                                                        • new
                                                        • -15%
                                                        Pour corian / HIMACS
                                                        Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                        52,70 €62,00 €
                                                        Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                        • new
                                                          Pour corian / HIMACS
                                                          Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                          52,70 €62,00 €
                                                          Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                          • new
                                                            Pour corian / HIMACS
                                                            Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                            Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
                                                            52,70 €62,00 €Prix de base-15% offPrix
                                                            En stock 2 Articles
                                                            Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                            • Nouveau
                                                              Pour corian / HIMACS
                                                              Bearing guide trimmer Z2 for solid surface D19 S12mm
                                                              Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
                                                              En stock 2 Articles
                                                              52,70 €62,00 €Prix de base-15% offPrix
                                                              • new
                                                              • -15%
                                                              Pour corian / HIMACS
                                                              Bevel cutter 75° S12mm for solid surface
                                                              54,40 €64,00 €
                                                              Bevel cutter 75° S12mm for solid surface
                                                              • new
                                                                Pour corian / HIMACS
                                                                Bevel cutter 75° S12mm for solid surface
                                                                54,40 €64,00 €
                                                                Bevel cutter 75° S12mm for solid surface
                                                                • new
                                                                  Pour corian / HIMACS
                                                                  Bevel cutter 75° S12mm for solid surface
                                                                  Bevel cutter for solid surface
                                                                  54,40 €64,00 €Prix de base-15% offPrix
                                                                  En rupture de stock (se renseigner sur le délai de livraison)
                                                                  Bevel cutter 75° S12mm for solid surface
                                                                  • Nouveau
                                                                    Pour corian / HIMACS
                                                                    Bevel cutter 75° S12mm for solid surface
                                                                    Bevel cutter for solid surface
                                                                    En rupture de stock (se renseigner sur le délai de livraison)
                                                                    54,40 €64,00 €Prix de base-15% offPrix
                                                                    • new
                                                                    • -15%
                                                                    Pour corian / HIMACS
                                                                    Sinking cutter for solid surface
                                                                    59,47 €69,96 €
                                                                    Sinking cutter for solid surfaceSinking cutter for solid surface
                                                                    • new
                                                                      Pour corian / HIMACS
                                                                      Sinking cutter for solid surface
                                                                      59,47 €69,96 €
                                                                      Sinking cutter for solid surfaceSinking cutter for solid surface
                                                                      • new
                                                                        Pour corian / HIMACS
                                                                        Sinking cutter for solid surface
                                                                        For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
                                                                        59,47 €69,96 €Prix de base-15% offPrix
                                                                        En rupture de stock (se renseigner sur le délai de livraison)
                                                                        Sinking cutter for solid surfaceSinking cutter for solid surface
                                                                        • Nouveau
                                                                          Pour corian / HIMACS
                                                                          Sinking cutter for solid surface
                                                                          For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
                                                                          En rupture de stock (se renseigner sur le délai de livraison)
                                                                          59,47 €69,96 €Prix de base-15% offPrix
                                                                          • new
                                                                          • -15%
                                                                          Pour corian / HIMACS
                                                                          Guttering cutter R4 S12mm for solid surface
                                                                          64,95 €76,41 €
                                                                          Guttering cutter R4 S12mm for solid surfaceGuttering cutter R4 S12mm for solid surface
                                                                          • new
                                                                            Pour corian / HIMACS
                                                                            Guttering cutter R4 S12mm for solid surface
                                                                            64,95 €76,41 €
                                                                            Guttering cutter R4 S12mm for solid surfaceGuttering cutter R4 S12mm for solid surface
                                                                            • new
                                                                              Pour corian / HIMACS
                                                                              Guttering cutter R4 S12mm for solid surface
                                                                              Guttering cutter for solid surface
                                                                              64,95 €76,41 €Prix de base-15% offPrix
                                                                              En stock 1 Articles
                                                                              Guttering cutter R4 S12mm for solid surfaceGuttering cutter R4 S12mm for solid surface
                                                                              • Nouveau
                                                                                Pour corian / HIMACS
                                                                                Guttering cutter R4 S12mm for solid surface
                                                                                Guttering cutter for solid surface
                                                                                En stock 1 Articles
                                                                                64,95 €76,41 €Prix de base-15% offPrix
                                                                                • new
                                                                                • -15%
                                                                                Pour corian / HIMACS
                                                                                Overflow edge cutter for curved fronts for solid surface
                                                                                66,30 €78,00 €
                                                                                Overflow edge cutter for curved fronts for solid surface
                                                                                • new
                                                                                  Pour corian / HIMACS
                                                                                  Overflow edge cutter for curved fronts for solid surface
                                                                                  66,30 €78,00 €
                                                                                  Overflow edge cutter for curved fronts for solid surface
                                                                                  • new
                                                                                    Pour corian / HIMACS
                                                                                    Overflow edge cutter for curved fronts for solid surface
                                                                                    Overflow edge cutter for curved fronts for solid surface
                                                                                    66,30 €78,00 €Prix de base-15% offPrix
                                                                                    En rupture de stock (se renseigner sur le délai de livraison)
                                                                                    Overflow edge cutter for curved fronts for solid surface
                                                                                    • Nouveau
                                                                                      Pour corian / HIMACS
                                                                                      Overflow edge cutter for curved fronts for solid surface
                                                                                      Overflow edge cutter for curved fronts for solid surface
                                                                                      En rupture de stock (se renseigner sur le délai de livraison)
                                                                                      66,30 €78,00 €Prix de base-15% offPrix
                                                                                      • new
                                                                                      • -15%
                                                                                      Pour corian / HIMACS
                                                                                      Rounding over cutter R5 S12mm for solid surface materials
                                                                                      67,15 €79,00 €
                                                                                      Rounding over cutter R5 S12mm for solid surface materials
                                                                                      • new
                                                                                        Pour corian / HIMACS
                                                                                        Rounding over cutter R5 S12mm for solid surface materials
                                                                                        67,15 €79,00 €
                                                                                        Rounding over cutter R5 S12mm for solid surface materials
                                                                                        • new
                                                                                          Pour corian / HIMACS
                                                                                          Rounding over cutter R5 S12mm for solid surface materials
                                                                                          Rounding over cutter with bearing for solid surface materials
                                                                                          67,15 €79,00 €Prix de base-15% offPrix
                                                                                          En stock 1 Articles
                                                                                          Rounding over cutter R5 S12mm for solid surface materials
                                                                                          • Nouveau
                                                                                            Pour corian / HIMACS
                                                                                            Rounding over cutter R5 S12mm for solid surface materials
                                                                                            Rounding over cutter with bearing for solid surface materials
                                                                                            En stock 1 Articles
                                                                                            67,15 €79,00 €Prix de base-15% offPrix
                                                                                            • new
                                                                                            • -15%
                                                                                            Pour corian / HIMACS
                                                                                            Rounding over cutter R3 S12mm for solid surface materials
                                                                                            67,15 €79,00 €
                                                                                            Rounding over cutter R3 S12mm for solid surface materials
                                                                                            • new
                                                                                              Pour corian / HIMACS
                                                                                              Rounding over cutter R3 S12mm for solid surface materials
                                                                                              67,15 €79,00 €
                                                                                              Rounding over cutter R3 S12mm for solid surface materials
                                                                                              • new
                                                                                                Pour corian / HIMACS
                                                                                                Rounding over cutter R3 S12mm for solid surface materials
                                                                                                Rounding over cutter with bearing for solid surface materials
                                                                                                67,15 €79,00 €Prix de base-15% offPrix
                                                                                                En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                Rounding over cutter R3 S12mm for solid surface materials
                                                                                                • Nouveau
                                                                                                  Pour corian / HIMACS
                                                                                                  Rounding over cutter R3 S12mm for solid surface materials
                                                                                                  Rounding over cutter with bearing for solid surface materials
                                                                                                  En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                  67,15 €79,00 €Prix de base-15% offPrix
                                                                                                  • new
                                                                                                  • -15%
                                                                                                  Pour corian / HIMACS
                                                                                                  Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                  68,85 €81,00 €
                                                                                                  Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                  • new
                                                                                                    Pour corian / HIMACS
                                                                                                    Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                    68,85 €81,00 €
                                                                                                    Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                    • new
                                                                                                      Pour corian / HIMACS
                                                                                                      Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                      Rounding over cutter with bearing for solid surface materials
                                                                                                      68,85 €81,00 €Prix de base-15% offPrix
                                                                                                      En stock 1 Articles
                                                                                                      Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                      • Nouveau
                                                                                                        Pour corian / HIMACS
                                                                                                        Rounding over cutter R6.35 S12mm for solid surface materials
                                                                                                        Rounding over cutter with bearing for solid surface materials
                                                                                                        En stock 1 Articles
                                                                                                        68,85 €81,00 €Prix de base-15% offPrix
                                                                                                        • new
                                                                                                        • -15%
                                                                                                        Pour corian / HIMACS
                                                                                                        Guttering cutter R5 S12mm for solid surface
                                                                                                        70,55 €83,00 €
                                                                                                        Guttering cutter R5 S12mm for solid surface
                                                                                                        • new
                                                                                                          Pour corian / HIMACS
                                                                                                          Guttering cutter R5 S12mm for solid surface
                                                                                                          70,55 €83,00 €
                                                                                                          Guttering cutter R5 S12mm for solid surface
                                                                                                          • new
                                                                                                            Pour corian / HIMACS
                                                                                                            Guttering cutter R5 S12mm for solid surface
                                                                                                            Guttering cutter for solid surface
                                                                                                            70,55 €83,00 €Prix de base-15% offPrix
                                                                                                            En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                            Guttering cutter R5 S12mm for solid surface
                                                                                                            • Nouveau
                                                                                                              Pour corian / HIMACS
                                                                                                              Guttering cutter R5 S12mm for solid surface
                                                                                                              Guttering cutter for solid surface
                                                                                                              En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                              70,55 €83,00 €Prix de base-15% offPrix
                                                                                                              • new
                                                                                                              • -15%
                                                                                                              Pour corian / HIMACS
                                                                                                              Rounding over cutter R8 S12mm for solid surface materials
                                                                                                              70,55 €83,00 €
                                                                                                              Rounding over cutter R8 S12mm for solid surface materials
                                                                                                              • new
                                                                                                                Pour corian / HIMACS
                                                                                                                Rounding over cutter R8 S12mm for solid surface materials
                                                                                                                70,55 €83,00 €
                                                                                                                Rounding over cutter R8 S12mm for solid surface materials
                                                                                                                • new
                                                                                                                  Pour corian / HIMACS
                                                                                                                  Rounding over cutter R8 S12mm for solid surface materials
                                                                                                                  Rounding over cutter with bearing for solid surface materials
                                                                                                                  70,55 €83,00 €Prix de base-15% offPrix
                                                                                                                  En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                  Rounding over cutter R8 S12mm for solid surface materials
                                                                                                                  • Nouveau
                                                                                                                    Pour corian / HIMACS
                                                                                                                    Rounding over cutter R8 S12mm for solid surface materials
                                                                                                                    Rounding over cutter with bearing for solid surface materials
                                                                                                                    En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                    70,55 €83,00 €Prix de base-15% offPrix
                                                                                                                    • new
                                                                                                                    • -15%
                                                                                                                    Pour corian / HIMACS
                                                                                                                    Inlay cutter for solid surface
                                                                                                                    70,55 €83,00 €
                                                                                                                    Inlay cutter for solid surface
                                                                                                                    • new
                                                                                                                      Pour corian / HIMACS
                                                                                                                      Inlay cutter for solid surface
                                                                                                                      70,55 €83,00 €
                                                                                                                      Inlay cutter for solid surface
                                                                                                                      • new
                                                                                                                        Pour corian / HIMACS
                                                                                                                        Inlay cutter for solid surface
                                                                                                                        Inlay cutter for solid surface
                                                                                                                        70,55 €83,00 €Prix de base-15% offPrix
                                                                                                                        En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                        Inlay cutter for solid surface
                                                                                                                        • Nouveau
                                                                                                                          Pour corian / HIMACS
                                                                                                                          Inlay cutter for solid surface
                                                                                                                          Inlay cutter for solid surface
                                                                                                                          En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                          70,55 €83,00 €Prix de base-15% offPrix
                                                                                                                          • new
                                                                                                                          • -15%
                                                                                                                          Pour corian / HIMACS
                                                                                                                          Bevel cutter for solid surface
                                                                                                                          72,25 €85,00 €
                                                                                                                          Bevel cutter for solid surface
                                                                                                                          • new
                                                                                                                            Pour corian / HIMACS
                                                                                                                            Bevel cutter for solid surface
                                                                                                                            72,25 €85,00 €
                                                                                                                            Bevel cutter for solid surface
                                                                                                                            • new
                                                                                                                              Pour corian / HIMACS
                                                                                                                              Bevel cutter for solid surface
                                                                                                                              Bevel cutter for solid surface
                                                                                                                              72,25 €85,00 €Prix de base-15% offPrix
                                                                                                                              En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                              Bevel cutter for solid surface
                                                                                                                              • Nouveau
                                                                                                                                Pour corian / HIMACS
                                                                                                                                Bevel cutter for solid surface
                                                                                                                                Bevel cutter for solid surface
                                                                                                                                En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                72,25 €85,00 €Prix de base-15% offPrix
                                                                                                                                • new
                                                                                                                                • -15%
                                                                                                                                Pour corian / HIMACS
                                                                                                                                Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                73,10 €86,00 €
                                                                                                                                Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                • new
                                                                                                                                  Pour corian / HIMACS
                                                                                                                                  Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                  73,10 €86,00 €
                                                                                                                                  Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                  • new
                                                                                                                                    Pour corian / HIMACS
                                                                                                                                    Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                    Rounding over cutter with bearing for solid surface materials
                                                                                                                                    73,10 €86,00 €Prix de base-15% offPrix
                                                                                                                                    En stock 1 Articles
                                                                                                                                    Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                    • Nouveau
                                                                                                                                      Pour corian / HIMACS
                                                                                                                                      Rounding over cutter R12,7 S12mm for solid surface materials
                                                                                                                                      Rounding over cutter with bearing for solid surface materials
                                                                                                                                      En stock 1 Articles
                                                                                                                                      73,10 €86,00 €Prix de base-15% offPrix
                                                                                                                                      • new
                                                                                                                                      • -15%
                                                                                                                                      Pour corian / HIMACS
                                                                                                                                      Cove mould cutter for solid surface
                                                                                                                                      74,80 €88,00 €
                                                                                                                                      Cove mould cutter for solid surface
                                                                                                                                      • new
                                                                                                                                        Pour corian / HIMACS
                                                                                                                                        Cove mould cutter for solid surface
                                                                                                                                        74,80 €88,00 €
                                                                                                                                        Cove mould cutter for solid surface
                                                                                                                                        • new
                                                                                                                                          Pour corian / HIMACS
                                                                                                                                          Cove mould cutter for solid surface
                                                                                                                                          Cove mould cutter for solid surface
                                                                                                                                          74,80 €88,00 €Prix de base-15% offPrix
                                                                                                                                          En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                          Cove mould cutter for solid surface
                                                                                                                                          • Nouveau
                                                                                                                                            Pour corian / HIMACS
                                                                                                                                            Cove mould cutter for solid surface
                                                                                                                                            Cove mould cutter for solid surface
                                                                                                                                            En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                            74,80 €88,00 €Prix de base-15% offPrix
                                                                                                                                            • new
                                                                                                                                            • -15%
                                                                                                                                            Pour corian / HIMACS
                                                                                                                                            V-Groove cutter for solid surface
                                                                                                                                            75,65 €89,00 €
                                                                                                                                            V-Groove cutter for solid surface
                                                                                                                                            • new
                                                                                                                                              Pour corian / HIMACS
                                                                                                                                              V-Groove cutter for solid surface
                                                                                                                                              75,65 €89,00 €
                                                                                                                                              V-Groove cutter for solid surface
                                                                                                                                              • new
                                                                                                                                                Pour corian / HIMACS
                                                                                                                                                V-Groove cutter for solid surface
                                                                                                                                                V-Groove cutter for solid surface
                                                                                                                                                75,65 €89,00 €Prix de base-15% offPrix
                                                                                                                                                En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                V-Groove cutter for solid surface
                                                                                                                                                • Nouveau
                                                                                                                                                  Pour corian / HIMACS
                                                                                                                                                  V-Groove cutter for solid surface
                                                                                                                                                  V-Groove cutter for solid surface
                                                                                                                                                  En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                  75,65 €89,00 €Prix de base-15% offPrix
                                                                                                                                                  • new
                                                                                                                                                  • -15%
                                                                                                                                                  Pour corian / HIMACS
                                                                                                                                                  Bevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                  78,20 €92,00 €
                                                                                                                                                  Bevel cutter D23 S12mm for repair work on solid surface materialBevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                  • new
                                                                                                                                                    Pour corian / HIMACS
                                                                                                                                                    Bevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                    78,20 €92,00 €
                                                                                                                                                    Bevel cutter D23 S12mm for repair work on solid surface materialBevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                    • new
                                                                                                                                                      Pour corian / HIMACS
                                                                                                                                                      Bevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                      Bevel cutter for repair work on solid surface material
                                                                                                                                                      78,20 €92,00 €Prix de base-15% offPrix
                                                                                                                                                      En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                      Bevel cutter D23 S12mm for repair work on solid surface materialBevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                      • Nouveau
                                                                                                                                                        Pour corian / HIMACS
                                                                                                                                                        Bevel cutter D23 S12mm for repair work on solid surface material
                                                                                                                                                        Bevel cutter for repair work on solid surface material
                                                                                                                                                        En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                        78,20 €92,00 €Prix de base-15% offPrix
                                                                                                                                                        • new
                                                                                                                                                        • -15%
                                                                                                                                                        Pour corian / HIMACS
                                                                                                                                                        Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                        78,20 €92,00 €
                                                                                                                                                        Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                        • new
                                                                                                                                                          Pour corian / HIMACS
                                                                                                                                                          Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                          78,20 €92,00 €
                                                                                                                                                          Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                          • new
                                                                                                                                                            Pour corian / HIMACS
                                                                                                                                                            Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                            Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                            78,20 €92,00 €Prix de base-15% offPrix
                                                                                                                                                            En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                            Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                            • Nouveau
                                                                                                                                                              Pour corian / HIMACS
                                                                                                                                                              Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                              Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                              En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                              78,20 €92,00 €Prix de base-15% offPrix
                                                                                                                                                              • new
                                                                                                                                                              • -15%
                                                                                                                                                              Pour corian / HIMACS
                                                                                                                                                              Guttering cutter R6 S12mm for solid surface
                                                                                                                                                              79,05 €93,00 €
                                                                                                                                                              Guttering cutter R6 S12mm for solid surface
                                                                                                                                                              • new
                                                                                                                                                                Pour corian / HIMACS
                                                                                                                                                                Guttering cutter R6 S12mm for solid surface
                                                                                                                                                                79,05 €93,00 €
                                                                                                                                                                Guttering cutter R6 S12mm for solid surface
                                                                                                                                                                • new
                                                                                                                                                                  Pour corian / HIMACS
                                                                                                                                                                  Guttering cutter R6 S12mm for solid surface
                                                                                                                                                                  Guttering cutter for solid surface
                                                                                                                                                                  79,05 €93,00 €Prix de base-15% offPrix
                                                                                                                                                                  En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                  Guttering cutter R6 S12mm for solid surface
                                                                                                                                                                  • Nouveau
                                                                                                                                                                    Pour corian / HIMACS
                                                                                                                                                                    Guttering cutter R6 S12mm for solid surface
                                                                                                                                                                    Guttering cutter for solid surface
                                                                                                                                                                    En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                    79,05 €93,00 €Prix de base-15% offPrix
                                                                                                                                                                    • new
                                                                                                                                                                    • -15%
                                                                                                                                                                    Pour corian / HIMACS
                                                                                                                                                                    Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                    79,05 €93,00 €
                                                                                                                                                                    Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                    • new
                                                                                                                                                                      Pour corian / HIMACS
                                                                                                                                                                      Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                      79,05 €93,00 €
                                                                                                                                                                      Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                      • new
                                                                                                                                                                        Pour corian / HIMACS
                                                                                                                                                                        Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                        Guttering profile cutter for solid surface
                                                                                                                                                                        79,05 €93,00 €Prix de base-15% offPrix
                                                                                                                                                                        En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                        Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                        • Nouveau
                                                                                                                                                                          Pour corian / HIMACS
                                                                                                                                                                          Guttering profile cutter D16 R5 for solid surface
                                                                                                                                                                          Guttering profile cutter for solid surface
                                                                                                                                                                          En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                          79,05 €93,00 €Prix de base-15% offPrix
                                                                                                                                                                          • new
                                                                                                                                                                          • -15%
                                                                                                                                                                          Pour corian / HIMACS
                                                                                                                                                                          Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                          79,90 €94,00 €
                                                                                                                                                                          Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                          • new
                                                                                                                                                                            Pour corian / HIMACS
                                                                                                                                                                            Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                            79,90 €94,00 €
                                                                                                                                                                            Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                            • new
                                                                                                                                                                              Pour corian / HIMACS
                                                                                                                                                                              Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                              Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                                              79,90 €94,00 €Prix de base-15% offPrix
                                                                                                                                                                              En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                              Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                              • Nouveau
                                                                                                                                                                                Pour corian / HIMACS
                                                                                                                                                                                Overflow edge cutter L1-15 L2-23 for straight fronts for solid surface
                                                                                                                                                                                Overflow edge cutter for straight fronts for solid surface
                                                                                                                                                                                En rupture de stock (se renseigner sur le délai de livraison)
                                                                                                                                                                                79,90 €94,00 €Prix de base-15% offPrix
                                                                                                                                                                                • new
                                                                                                                                                                                • -15%
                                                                                                                                                                                Pour corian / HIMACS
                                                                                                                                                                                Bevel cutter with beveled bearing for solid surface
                                                                                                                                                                                80,13 €94,26 €
                                                                                                                                                                                Bevel cutter with beveled bearing for solid surfaceBevel cutter with beveled bearing for solid surface
                                                                                                                                                                                • new
                                                                                                                                                                                  Pour corian / HIMACS
                                                                                                                                                                                  Bevel cutter with beveled bearing for solid surface
                                                                                                                                                                                  80,13 €94,26 €
                                                                                                                                                                                  Bevel cutter with beveled bearing for solid surfaceBevel cutter with beveled bearing for solid surface
                                                                                                                                                                                  • new
                                                                                                                                                                                    Pour corian / HIMACS
                                                                                                                                                                                    Bevel cutter with beveled bearing for solid surface
                                                                                                                                                                                    For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
                                                                                                                                                                                    80,13 €94,26 €Prix de base-15% offPrix
                                                                                                                                                                                    En stock 1 Articles
                                                                                                                                                                                    Bevel cutter with beveled bearing for solid surfaceBevel cutter with beveled bearing for solid surface
                                                                                                                                                                                    • Nouveau
                                                                                                                                                                                      Pour corian / HIMACS
                                                                                                                                                                                      Bevel cutter with beveled bearing for solid surface
                                                                                                                                                                                      For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.
                                                                                                                                                                                      En stock 1 Articles
                                                                                                                                                                                      80,13 €94,26 €Prix de base-15% offPrix