Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraises hélicoïdales Z2
Fraises hélicoïdales Z2 pour le traitement des matières plastiques
              Ref: AT2-4-50
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            10,00 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 3,0x57 pour aluminium, cuivre, plastiques
              Ref: AS2-3-57
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            3 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            10,00 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              12,00 €
                              -15%
                            
            
            
                                            10,20 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 5x50 pour aluminium, cuivre, plastiques
              Ref: AT2-5-50
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            7 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            11,00 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 4x57 pour aluminium, cuivre, plastiques
              Ref: AS2-4-57
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            3 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            11,00 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              15,00 €
                              -15%
                            
            
            
                                            12,75 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              17,00 €
                              -15%
                            
            
            
                                            14,45 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              17,00 €
                              -15%
                            
            
            
                                            14,45 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              17,00 €
                              -15%
                            
            
            
                                            14,45 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              17,00 €
                              -15%
                            
            
            
                                            14,45 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            4 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              22,00 €
                              -15%
                            
            
            
                                            18,70 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 8x80 pour aluminium, cuivre, plastiques
              Ref: AT2-8-80
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            2 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            19,00 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Double flute milling cutter D8 L16 S8mm for plastic and aluminium
              Ref: ALC08-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Double flute milling cutter D6 L14 S8mm for plastic and aluminium
              Ref: ALC06-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Double flute milling cutter D5 L12 S8mm for plastic and aluminium
              Ref: ALC05-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    Fraises hélicoïdales Z2
Double flute milling cutter D4 L12 S8mm for plastic and aluminium
              Ref: ALC04-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              25,00 €
                              -15%
                            
            
            
                                            21,25 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            2 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              27,00 €
                              -15%
                            
            
            
                                            22,95 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              27,00 €
                              -15%
                            
            
            
                                            22,95 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 10,0x72 pour aluminium, cuivre, plastiques
              Ref: AS2-10-72
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            5 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            23,00 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Fraise hélicoïdale AS2 12x83 pour aluminium, cuivre, plastiques
              Ref: AS2-12-83
            
                  
      
            Convient pour : aluminium, cuivre, plastiques
          
              
      
              
    
            			            3 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
            
            
                                            28,00 €
                          
          
          
          
              
      
              
    
            Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:
Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
          
              
      
              
    Suitable for:
Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              34,50 €
                              -15%
                            
            
            
                                            29,33 €
                          
          
          
          
              
      
              
    
            Spiral cutter Z2 Positive - Upcut for Plastics
Suitable for:
Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
          
              
      
              
    Suitable for:
Acrylonitrile butadiene styrene (ABS)
Polycarbonate
Polyethylene
Polypropylene
Polystyrene
Polyvinyl chloride (PVC)
Polymethyl methacrylate (Acrylic. Plexi etc.)
            			            2 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              34,50 €
                              -15%
                            
            
            
                                            29,33 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              35,00 €
                              -15%
                            
            
            
                                            29,75 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Double flute milling cutter D12 L14 S8mm for plastic and aluminium
              Ref: ALC012-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              35,00 €
                              -15%
                            
            
            
                                            29,75 €
                          
          
          
          
              
      
              
    Pour aluminium, ALUCOBOND, DiBOND, REYNOBOND
Double flute milling cutter D10 L14 S8mm for plastic and aluminium
              Ref: ALC010-DF-8
            
                  
      
            Double flute milling cutter for plastic and aluminium
          
              
      
              
    
            						 En rupture de stock, veuillez vous renseigner sur le délai de livraison
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              35,00 €
                              -15%
                            
            
            
                                            29,75 €
                          
          
          
          
              
      
              
    
            Solid carbide milling cutters for plastic processing, particularly suitable for acrylic.
The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
              
      
              
    The spiral cuts result in virtually no heat development and the cutting pressure is very low.
Cutting on the diameter with ground cut. Clockwise rotation
            			            1 en stock
			          
              
	 
	  
	
	  
	  
	  
      
                  
            
                          
              36,00 €
                              -15%
                            
            
            
                                            30,60 €
                          
          
          
          
              
      
              
     
           
           
           
           
           
           
   
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
               
              