Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Dovetail bit HW Z=2 D=14 A=10° L=12 GL=49 S=8mm
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre
Straight cutter with two flutes for clean finish. For...
Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Miniature bevel cutter with bearing 45 degrees
Miniature bevel cutter with bearing 45 degrees
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Straight bit shank 12 mm
Straight bit shank 12 mm
Titman rounding over cutter R3 S8
Titman rounding over cutter R3 S8
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 Shank 12 mm
Replacement tip Straight bit Z=1 S=8
Replacement tip Straight bit Z=1 S=8
Profile mould cutter
Profile mould cutter
