Filtrer par

Disponibilité

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Diamètre (D) : 16 mm
  • Diamètre (D) : 26mm
Straight Cutter TC Z2 D16 S8mm

Straight Cutter TC Z2 D16...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prix 24,00 €
EPROCUT EPROCUT Top bearing straight bit HW Z2 D16 L20 GL67 S8

EPROCUT EPROCUT Top bearing...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

Prix 25,20 € Prix de base 28,00 €
  • -10%
  • -10%
Straight Cutter TC Z2 D16 L32 S8mm

Straight Cutter TC Z2 D16...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Prix 26,00 €
EPROCUT Top bearing straight bits HW Z2 D16 L25 GL72 S8

EPROCUT Top bearing...

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

Prix 27,90 € Prix de base 31,00 €
  • -10%
  • -10%
AS2 16,0x92 AS2 16,0x92

AS2 16,0x92

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

Prix 35,00 €
ENT trimming cutter top ball bearing 16 x 19 mm

ENT trimming cutter top...

Bottom cutting. suitable for plunge. With 8 mm shank

Bottom cutting. suitable for plunge. With 8 mm shank

Prix 49,00 €
Straight Cutter with Centre Tip 26 x 20 x 60 mm

Straight Cutter with Centre...

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Prix 51,90 €
Profile guide cutter D16 L20 S8mm

Profile guide cutter D16...

Trimming cutter with bearing on shank for scanning overhead...

Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.

Prix 53,10 € Prix de base 59,00 €
  • -10%
  • -10%
Rounding over cutter R5 S12mm for solid surface materials

Rounding over cutter R5...

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Prix 71,10 € Prix de base 79,00 €
  • -10%
  • -10%
Retour en haut