JVL pro-line roundnose bit...
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 89 produits.
JVL pro-line roundnose bit D 19 mm
JVL pro-line roundnose bit D 19 mm
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
ENT trimming cutter TC 19 x 19 x 62 mm with 8mm shank
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Face milling bit HW Z=2 D=20 L=13 GL=45 S=8
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Convient pour : aluminium, cuivre, plastiques
Convient pour : aluminium, cuivre, plastiques
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 90° S8mm for ALUCOBOND, DiBOND, REYNOBOND
Water channel cutter with bearing
Water channel cutter with bearing
Straight bit shank 8mm
Straight bit shank 8mm
Replacement tip bearing guide cutter. For coated boards, solid...
Replacement tip bearing guide cutter. For coated boards, solid wood and wood-basedmaterials
Straight bit shank 8mm
Straight bit shank 8mm
Bearing guide trimmer Z2 for solid surface Suitable for...
Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...
Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8
Trimming cutter with bearing on shank for scanning overhead...
Trimming cutter with bearing on shank for scanning overhead templates. With centertip for immersion like a drill. Suitable for coated boards. solid woods and wood-basedmaterials.
Trimmers with bearing top and bottom
Trimmers with bearing top and bottom
Radius engraving cutter These double-edged cutters create a...
Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.
Rounding over cutter R4 S8mm
Rounding over cutter R4 S8mm
Rounding over cutter R4 S=6mm
Rounding over cutter R4 S=6mm