Filtrer par

Disponibilité

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Diamètre (D) : 2,5mm
  • Diamètre (D) : 25mm
BT4 2,5x40 BT4 2,5x40

BT4 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
BT2 2,5x40 BT2 2,5x40

BT2 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
ST2 2,5 x 40 ST2 2,5 x 40

ST2 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 11,00 €
ST4 2,5 x 40 ST4 2,5 x 40

ST4 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 12,00 €
ST3 2,5 x 40 ST3 2,5 x 40

ST3 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 15,00 €
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Straight Cutter with Centre Tip 25 x 20 x 52 mm

Straight Cutter with Centre...

Straight cutter with two flutes for clean finish. For...

Straight cutter with two flutes for clean finish. For grooving, rebating and mortising. With TC centre tip. The TC centre tip is ideal for plunging and working in abrasive materials such as chipboard, MDF, plywood and hardwood.

Prix 49,00 €
Bevel cutter with guide pin 45° S6mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Prix 58,50 € Prix de base 65,00 €
  • -10%
  • -10%
Bevel cutter with guide pin 45° S8mm

Bevel cutter with guide pin...

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Prix 58,50 € Prix de base 65,00 €
  • -10%
  • -10%
Bevel cutter with center tip 20° S8mm Bevel cutter with center tip 20° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Prix 68,40 € Prix de base 76,00 €
  • -10%
  • -10%
Overflow edge cutter for curved fronts for solid surface

Overflow edge cutter for...

Overflow edge cutter for curved fronts for solid surface

Overflow edge cutter for curved fronts for solid surface

Prix 70,20 € Prix de base 78,00 €
  • -10%
  • -10%
Bevel cutter 6° with beveled bearing for solid surface

Bevel cutter 6° with...

For edging sinks and vanity bowls. The special taper on the...

For edging sinks and vanity bowls. The special taper on the Bearing sleeve allows for perfect guide following around the inside of the bowl.

Prix 70,35 € Prix de base 78,17 €
  • -10%
  • -10%
Retour en haut