Filtrer par

Disponibilité

Diamètre de connexion

Diamètre (D)

Longueur de coupe - hauteur

Longueur totale

Rayon/angle

Coupeurs

Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Diamètre (D) : 2,5mm
  • Diamètre (D) : 30mm
BT4 2,5x40 BT4 2,5x40

BT4 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
BT2 2,5x40 BT2 2,5x40

BT2 2,5x40

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Prix 11,00 €
ST2 2,5 x 40 ST2 2,5 x 40

ST2 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 11,00 €
ST4 2,5 x 40 ST4 2,5 x 40

ST4 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 12,00 €
ST3 2,5 x 40 ST3 2,5 x 40

ST3 2,5 x 40

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Prix 15,00 €
Spiral cutter Negative for Plastics D2,5 L10 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D2,5 L10 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Hinge Boring Bit TC 30 mm S8mm ENT 21382

Hinge Boring Bit TC 30 mm...

Hinge boring bit with centre point and two bevelled flutes....

Hinge boring bit with centre point and two bevelled flutes. Because of their specially designed cutting edges they allow use on high speed machines up to 27000 rpm. Shank without flat for use on routing machines.

Prix 30,00 €
Hinge Mortising Cutter TC 30 mm ENT 13422

Hinge Mortising Cutter TC...

Specifically designed for cutting in hinges. stair treads and...

Specifically designed for cutting in hinges. stair treads and the general routing of larger flat bottom areas

Prix 43,00 €
Rounding over cutter R6.35 S12mm for solid surface materials

Rounding over cutter R6.35...

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Prix 72,90 € Prix de base 81,00 €
  • -10%
  • -10%
Bevel cutter with center tip 45° S8mm Bevel cutter with center tip 45° S8mm

Bevel cutter with center...

Bevel cutter with real center cutting edge for direct...

Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.

Prix 74,70 € Prix de base 83,00 €
  • -10%
  • -10%
Glue joint cutter TC ENT 16430 Glue joint cutter TC ENT 16430

Glue joint cutter TC ENT...

ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to...

ENT 16430 Glue joint cutter TC for wood thicknesses from 15 to max. 25 mm. with 8 mm shank.

Prix 76,00 €
Retour en haut