Fraises pour défonceuses

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys,...

Convient à: Acier, Acier inoxydable, Fonte, CO-superalloys, NI-superalloys, TI-superalloys

Spiral cutter Z1 Negative - Down cut for Plastics Suitable...

Spiral cutter Z1 Negative - Down cut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Straight bit shank 8mm

Straight bit shank 8mm

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  90°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Straight bit shank 8mm

Straight bit shank 8mm

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Ballbearings diameter 16 mm and 12,7 mm included.

Ballbearings diameter 16 mm and 12,7 mm included.

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12...

Titman Staff / corner bead bit with bearing HW Z=2 D=20 L=12 R=2 S=8

Radius engraving cutter These double-edged cutters create a...

Radius engraving cutter These double-edged cutters create a flat of approx. 1 mm at the bottom.

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

PCD Diamond straight router bit bottom cutting

PCD Diamond straight router bit bottom cutting

Straight bit shank 12 mm

Straight bit shank 12 mm

Coving cutter with 90 degrees tangential outlet for solid surface

Coving cutter with 90 degrees tangential outlet for solid surface