Fraises pour défonceuses

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Straight bit shank 8mm

Straight bit shank 8mm

For milling a shadow gap or water surge at the basin and water...

For milling a shadow gap or water surge at the basin and water drainage channels on the sink.

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

V-Groove cutter  108°  S8mm for ALUCOBOND, DiBOND, REYNOBOND

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Straight cutter internal thread M10x1.5

Straight cutter internal thread M10x1.5