Filtrer par
Disponibilité
Diamètre du trou
Épaisseur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Fraises pour défonceuses
Programme complet Toupies professionnelles pour un résultat parfait.
Groover 1.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 2.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Straight Cutter TC Z2 D24...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Groover 3.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 5.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Groover 4.5mm D36 d6.35 Z2
Groovers Z=2 d=6.35
Groovers Z=2 d=6.35
- -10%
- -10%
Straight bit 24mm L20mm S8mm
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Sinking cutter for solid...
For milling a shadow gap or water surge at the basin and water...
For milling a shadow gap or water surge at the basin and water drainage channels on the sink.
- -10%
- -10%
V-Groove cutter 108° S8mm...
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 108° S8mm for ALUCOBOND, DiBOND, REYNOBOND
- -10%
- -10%
V-Groove cutter 135° S8mm...
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
V-Groove cutter 135° S8mm for ALUCOBOND, DiBOND, REYNOBOND
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Rounding over cutter with...
Rounding over cutter with extended and tapering cutting edges....
Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.
- -10%
- -10%
Straight bit 24mm L15 S8mm...
Straight bit shank 8mm
Straight bit shank 8mm
- -10%
- -10%
Trimming bevel 45° S8mm...
Trimming bevel cutter with bearing
Trimming bevel cutter with bearing
- -10%
- -10%
Straight bit D24 L25 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Bevel cutter 45° S8mm
Bevel cutter S=8 with high diameter
Bevel cutter S=8 with high diameter
- -10%
- -10%
Rounding over bit R5 S8mm
Ballbearings diameter 16 mm and 12,7 mm included.
Ballbearings diameter 16 mm and 12,7 mm included.
- -10%
- -10%
Straight bit D24 L25...
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Straight bit D24 L45 S12mm
Straight bit shank 12 mm
Straight bit shank 12 mm
- -10%
- -10%
Weather strip D36 S12mm...
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
- -10%
- -10%
Weather strip cutter D36...
Cutter combination for milling grooves for flashover seals....
Cutter combination for milling grooves for flashover seals. Suitable for seals from: Schlegel QL-3434, QL-3070Deventer SV33, SP33, DS6677Trelleborg/Dipro L2020, L5019, L5020, L8003Goll AFK2615
- -10%
- -10%
Replacement tip rebate...
Replacement tip rebate cutter with bearing
Replacement tip rebate cutter with bearing
- -10%
- -10%
Bevel cutter 45° S12mm
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%
Reverse profil bevel cutter...
For folding, profiling and formatting in one operation.
For folding, profiling and formatting in one operation.
- -10%
- -10%