Filtrer par
Disponibilité
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
JVL pro-line Raised panel chamfer bit 25°
JVL pro-line Raised panel chamfer bit 25°
For chamfering thin sheets, plywood, acrylic, etc. For...
For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.
Bevel cutter heavy duty
Bevel cutter heavy duty
Bevel cutter with real center cutting edge for direct...
Bevel cutter with real center cutting edge for direct immersion in the material. For foldingand chamfering wood, laminate and plastic sheets.
Bevel cutter with bearing
Bevel cutter with bearing
Rounding over cutter with bearing for solid surface materials
Rounding over cutter with bearing for solid surface materials
Rounding over cutter R15 S=10mm
Rounding over cutter R15 S=10mm
Rounding over cutter R15 S=12mm
Rounding over cutter R15 S=12mm
Straight bit shank 8mm
Straight bit shank 8mm
Bevel cutter with bearing for solid surface
Bevel cutter with bearing for solid surface
Straight bit shank 12 mm
Straight bit shank 12 mm
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
ENT 17390 Tongue & Groove Set TC for wood thicknesses up...
ENT 17390 Tongue & Groove Set TC for wood thicknesses up to 19 mm. with 8 mm shank
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Bevel cutter with bearing and high cutting length
Bevel cutter with bearing and high cutting length
T-Slot cutter with radius
T-Slot cutter with radius
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Titman Staff / corner bead HW Z=2 D=28,7 L=23 R=6,3 S=8
Diamond PCD rounding over bit Shank 8 mm
Diamond PCD rounding over bit Shank 8 mm
Profile mould cutter
Profile mould cutter
Two flutes. With exchangeable ball bearing. The set combines a...
Two flutes. With exchangeable ball bearing. The set combines a profile cutter and a slotter. Both on a bearing mounted arbor. Stile and rail are produced by reversing the cutter parts. For woodthickness from 19 to 21 mm
Barley twist cutter BTC2
Barley twist cutter BTC2
Barley twist cutter BTC4
Barley twist cutter BTC4
Barley twist cutter BTC6
Barley twist cutter BTC6
