Fraises pour défonceuses

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line chamfer bit 25°x 22.2x13. 8mm shank

JVL pro-line roundnose bit D 19 mm

JVL pro-line roundnose bit D 19 mm

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

JVL pro-line Raised panel chamfer bit 25°

JVL pro-line Raised panel chamfer bit 25°

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

Convient à: Acier, Acier inoxydable, Fonte, Aluminium et cuivre

JVL Rounding over router bit R 6.35 mm with 8mm shank

JVL Rounding over router bit R 6.35 mm with 8mm shank

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

V-Groove cutter

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Dovetail bit HW D=13,5 A=13 degrees L=12,5 GL=44 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Face milling bit HW Z=2 D=20 L=13 GL=45 S=8

Profile guide cutter with bearing on shank

Profile guide cutter with bearing on shank

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...

ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Titman rounding cutter D=16,3 L=9 R=4 d=6,35 S=8

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with guide pin shank 8 mm

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Rounding over cutter with bearing for solid surface materials

Titman flute bit R=4 S=8

Titman flute bit R=4 S=8

Finger pull Cutters

Finger pull Cutters