Fraises pour défonceuses

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Convient pour : acier, acier inoxydable, fonte, aluminium,...

Convient pour : acier, acier inoxydable, fonte, aluminium, cuivre et plastiques.

ENT Straight Cutter TC / Two Flutes with grinded bottom cut...

ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.

Double flute milling cutter for plastic and aluminium

Double flute milling cutter for plastic and aluminium

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 6 mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Straight bit shank 8mm

Straight bit shank 8mm

Solid carbide milling cutter with rounded chip chamber and...

Solid carbide milling cutter with rounded chip chamber and mirror grinding.Optimized cutting geometry for processing all non-ferrous metals.

Straight bit shank 12 mm

Straight bit shank 12 mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Straight bit shank 8mm

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8

Trimmers with bearing

Trimmers with bearing

Coupe-guide de roulement pour couper les placages saillants et...

Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for:...

Spiral cutter Z2 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)