EPROCUT Flush trim bit HW...
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
- -10%
- -10%
Filtrer par
Disponibilité
Diamètre extérieur
Diamètre de connexion
Diamètre (D)
Longueur de coupe - hauteur
Longueur totale
Rayon/angle
Coupeurs
Programme complet Toupies professionnelles pour un résultat parfait.
Il y a 50 produits.
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8
Single flute cutter with neck for plastic and aluminium
Single flute cutter with neck for plastic and aluminium
ENT Straight Cutter TC / Two Flutes with grinded bottom cut...
ENT Straight Cutter TC / Two Flutes with grinded bottom cut and 8 mm shank.
Double flute milling cutter for plastic and aluminium
Double flute milling cutter for plastic and aluminium
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for:...
Spiral cutter Z1 Positive - Upcut for Plastics Suitable for: Acrylonitrile butadiene styrene (ABS) Polycarbonate Polyethylene Polypropylene Polystyrene Polyvinyl chloride (PVC) Polymethyl methacrylate (Acrylic. Plexi etc.)
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 6 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 12 mm
Straight bit shank 12 mm
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Dovetail bit Z=2 D=10 A=10° L=9 GL=45 S=8
Profile guide cutter with bearing on shank
Profile guide cutter with bearing on shank
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8...
ENT 13821 Chamfer cutter 45 degrees with ball bearing and 8 mm shank
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Straight bit shank 8mm
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10 degrees L=16 GL=52 S=10
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Dovetail bit HW Z=2 D=20 A=10° L=16 GL=52 S=8
Trimmers with bearing
Trimmers with bearing
Coupe-guide de roulement pour couper les placages saillants et...
Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.
Trimmers with bearing
Trimmers with bearing