Fraises pour défonceuses

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Convient à: Acier, Acier inoxydable et cuivre

Convient à: Acier, Acier inoxydable et cuivre

Convient pour : aluminium, cuivre, plastiques

Convient pour : aluminium, cuivre, plastiques

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

EPROCUT Top bearing straight bits HW Z=2 D=16 L=25 GL=72 S=8

Straight bit shank 6 mm

Straight bit shank 6 mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Coupe-guide de roulement pour couper les placages saillants et...

Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Straight bit shank 12 mm

Straight bit shank 12 mm

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Weather strip cutter Straight double

Weather strip cutter Straight double

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.