Fraises pour défonceuses

JVL pro-line rounding over bit 31.8mm

JVL pro-line rounding over bit 31.8mm

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

ENT Straight Cutter TC / One Flute with 8 mm shank

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

EPROCUT Flush trim bit HW Z=2 D=12,7 L=16 GL=48 S=8

Single flute cutter with neck for plastic and aluminium

Single flute cutter with neck for plastic and aluminium

Straight bit shank 6 mm

Straight bit shank 6 mm

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Coupe-guide de roulement pour couper les placages saillants et...

Coupe-guide de roulement pour couper les placages saillants et les bords en plastique. Il est également possible de copier à l'aide d'un modèle. Les petits diamètres sont idéaux pour le traitement des coins intérieurs.

Trimmers with bearing

Trimmers with bearing

Guttering cutter

Guttering cutter

Guttering cutter

Guttering cutter

Bearing guide trimmer Z2 for solid surface Suitable for...

Bearing guide trimmer Z2 for solid surface Suitable for Corian Hi-Macs Staron Avonite Hanex Varicor domovari

Bevel cutter for solid surface

Bevel cutter for solid surface

For chamfering thin sheets, plywood, acrylic, etc. For...

For chamfering thin sheets, plywood, acrylic, etc. For interior and exterior contours.

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 8 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Straight bit shank 12 mm

Straight bit shank 12 mm

Side slotting cutter Shank 12 mm

Side slotting cutter Shank 12 mm

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.

Rounding over cutter with extended and tapering cutting edges....

Rounding over cutter with extended and tapering cutting edges. This prevents adhesive residues from getting stuck between the cutting edges and the thrust bearing and causing excessive temperatures.