Fraises pour défonceuses

Programme complet Toupies professionnelles pour un résultat parfait.

Filtres actifs

  • Longueur totale : 67mm
  • Longueur totale : 68mm
Spiral cutter Negative for Plastics D3 L25 S3mm

Spiral cutter Negative for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 15,30 € Prix de base 17,00 €
  • -10%
  • -10%
Spiral cutter Positiv for Plastics D3 L25 S3mm

Spiral cutter Positiv for...

Solid carbide milling cutters for plastic processing,...

Solid carbide milling cutters for plastic processing, particularly suitable for acrylic. The spiral cuts result in virtually no heat development and the cutting pressure is very low. Cutting on the diameter with ground cut. Clockwise rotation

Prix 22,50 € Prix de base 25,00 €
  • -10%
  • -10%
ENT trimming cutter TC 12.7 x 25.4 x 68 mm

ENT trimming cutter TC 12.7...

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

ENT trimming cutter TC12.7 x 25.4 x 68 mm with 6 mm shank

Prix 25,00 €
EPROCUT EPROCUT Top bearing straight bit HW Z2 D16 L20 GL67 S8

EPROCUT EPROCUT Top bearing...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20...

EPROCUT EPROCUT Top bearing straight bit HW Z=2 D=16 L=20 GL=67 S=8

Prix 25,20 € Prix de base 28,00 €
  • -10%
  • -10%
ENT trimming cutter TC 12.7 x 25.4 x 68 mm

ENT trimming cutter TC 12.7...

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 12.7 x 25.4 x 68 mm with 8mm shank

Prix 25,50 €
Arbor for Groovers 6,35mm S12mm

Arbor for Groovers 6,35mm...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable...

Arbor inclusive spacers and bearing no. B16 (D = 16). Suitable for groovers with bore 6,35 mm

Prix 27,00 € Prix de base 30,00 €
  • -10%
  • -10%
ENT trimming cutter TC 9.5 x 25.4 x 68 mm

ENT trimming cutter TC 9.5...

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

ENT trimming cutter TC 9.5 x 25.4 x 68 mm with 8mm shank

Prix 28,00 €
Trimmer D18 S12mm negative axis angle Trimmer D18 S12mm negative axis angle

Trimmer D18 S12mm...

This results in a particularly clean result with thin coatings...

This results in a particularly clean result with thin coatings and long-fiber funnels.

Prix 45,90 € Prix de base 51,00 €
  • -10%
  • -10%
Retour en haut